matt_isserstedt
Diamond
- Joined
- Dec 15, 2003
- Location
- suburbs of Ann Arbor, MI, USA
I wanted to throw out a fishing line and see if anyone has any ideas or literature.
Looking to replace a Furnas 3 position maintained selector switch which has been abused (and bonus points for 120vac indicator lamp)
I believe it is mid 1960s vintage. Hoping I can find one on ebay.
Here's the issue: someone apparently scraped off the tag and gave it to their maintenance boss who forgot about it or wouldn't spend the money, or hit a dead end.
What I do have is other part numbers in the same 4 postion enclosure...
BHP15X and BHP16X are the stop/start PBs. Those work just fine.
I could probably go back with Al Bradley 30mm stuff but I think they are deeper than this case and so that would pose a new issue requiring a new enclosure and the trim-nuts would obscure the labels....
Thanks for any help!
Looking to replace a Furnas 3 position maintained selector switch which has been abused (and bonus points for 120vac indicator lamp)
I believe it is mid 1960s vintage. Hoping I can find one on ebay.
Here's the issue: someone apparently scraped off the tag and gave it to their maintenance boss who forgot about it or wouldn't spend the money, or hit a dead end.
What I do have is other part numbers in the same 4 postion enclosure...
BHP15X and BHP16X are the stop/start PBs. Those work just fine.
I could probably go back with Al Bradley 30mm stuff but I think they are deeper than this case and so that would pose a new issue requiring a new enclosure and the trim-nuts would obscure the labels....
Thanks for any help!