diesel-xj
Aluminum
- Joined
- Sep 27, 2011
- Location
- South Texas
hello. I have a new to me 19 year old CRS F3. This is 6 axis arm with a C500C controller. I am looking for a copy of any of the CRS software
titles are: RAPL-3, Robcomm3, or ActiveRobot.
If there are any CRS operators out there, I could use a bit of help writing programs. Supposedly the arm can operate without the above software, but I think it will be a whole lot easier with the correct software.
this Arm is supposed to be the predecessor of the KUKA KR-3, but I don't think the control or software interchange, I am not sure on that.
thanks
titles are: RAPL-3, Robcomm3, or ActiveRobot.
If there are any CRS operators out there, I could use a bit of help writing programs. Supposedly the arm can operate without the above software, but I think it will be a whole lot easier with the correct software.
this Arm is supposed to be the predecessor of the KUKA KR-3, but I don't think the control or software interchange, I am not sure on that.
thanks