What's new
What's new

apron clamps cazenueve 575

stuarth44

Plastic
Joined
Jan 19, 2020
hb575 has two clamps, for stopping the apron sliding back when facing they were clamping the apron when i first used the machine, now they do do not , Wondering if leaving them clamped whilst turning has caused the prob, there is no damage to the pads which are about 2x 2/2 inch with needle roller bearings, the pin that actuates the locking of the pads seems ok too, sorry dunno how to rotate image here
 

Attachments

  • 20200205_073323.jpg
    20200205_073323.jpg
    89.2 KB · Views: 43
Check if the handles can be easily removed and re-clocked to give more travel

I've rotated your pic
You need to have it positioned correctly before uploading
 

Attachments

  • lock20200205_073323.jpg
    lock20200205_073323.jpg
    83.6 KB · Views: 28
Check if the handles can be easily removed and re-clocked to give more travel

Your pulling up to lock...correct?

I've rotated your pic
You need to have it positioned correctly before uploading
 








 
Back
Top