slnielsen
Hot Rolled
- Joined
- Nov 26, 2004
- Location
- Viborg, Denmark, Europe
Hello!
Just saved a lathe at the edge of a scrapcontainer, and started inspecting it today!
It used to be a production lathe with pneumatic support, and electrical driven slide (lenght). The spindle for the crossslide is missing. Does anyone outthere know anything on these machines, a websearch revealed allmost nothing!
Specially looking for mechanical drawings..
Need to do some rewiring as well, but mostly removing unused components..
Tomorrow i'll take some photos of it, and post them..
Søren
[ 10-14-2006, 02:21 AM: Message edited by: søren ]
Just saved a lathe at the edge of a scrapcontainer, and started inspecting it today!
It used to be a production lathe with pneumatic support, and electrical driven slide (lenght). The spindle for the crossslide is missing. Does anyone outthere know anything on these machines, a websearch revealed allmost nothing!
Specially looking for mechanical drawings..
Need to do some rewiring as well, but mostly removing unused components..
Tomorrow i'll take some photos of it, and post them..
Søren
[ 10-14-2006, 02:21 AM: Message edited by: søren ]