Search:

You Are Welcome!

Actually, the real intention was a Redneck Genius, but whotever.

Y'now!
Cars perched on ol' tires 'll keep'm dry and rust-free(er).
Sealed Bud cans 'll keep shit afloat when...

Sumbitch wmpy !!!
You're a freakin' genius!!!

Never mind chunks of wood, rather larger pieces of sponges!
No banging, no splashing.

( Damm, someof'm rednecks truly deserve a real prize! )

Like Nerdlinger said, large bin with water.
The water actually has a couple benefits.
First, draining off the coolant is almost pointless as there is precious little to save.
BUT!!! the water bath...

IF!!! your control supports it, you can write a G83 cycle using I J K instead of Q.

I : First peck depth
J: Amount to reduce successive peck depths
K: Minimum peck depth

So, let's say you...

Dumb thinkin' here ...

Would it be possible to invert the post count of the member in question, which could then be used to trigger the "Granite" status?
IOW if the post count is negative, then...

Well, may want to forget about the serial stuff ( RS232 ) and just roll with the PCMCIA instead.

Them Japs have never really figured out the idea behind a serial comms, and as a result all of...

Dunno about what should go where. Isolate or transfer vibration, but these guys are in that business:


Vibration isolation pads - AirLoc - for machine installation

What-if : instead of a dimensional Go/No-go inspection, change to a functional pass/fail check?

With G98 P1234 call, there must be a registered, separate program in the control.
With a G98 Q1234, there must be a block# N1234 in the SAME program.

IOW, a G98 P call is a subPROGRAM call,...

While all that is correct, I think the OP's question was more along the line of how does one approach multiple part programming.
Yes, the discussion has taken a turn towards what their CAM can or...

What is the name of the file on your PC?
The Haas accepts the same file name as it is on the PC side without regard of the actual contents.
IOW the NextGen control does not interrogate the...

Rob, Just please... Fuck-Off!
We already have Rozen and Triumph(something) championing for the spot, and they are way ahead of you.

I am assuming ( Gordon-like) that you are referring to cutter comp ....



I have to ask why you would do this ? [/QUOTE]

Because threadmilling with comp lets you get to the finish line...

OK, so WTF did I miss ...
And I mean, JWTF did I miss in 10 minutes after the OP?
Turkey and Canada defending Who and What exactly?
Against Who and What exactly?

I've got like 30 or so of these from the 11" high ones.
Same fiberglass with molded-in wire mesh.
I can assure you, they hold #500 ea. while stacked 3 high!

Plexton Stack and Nest Containers

That is a builder-specific issue and not Fanuc.
My Haas SL10 and the Mori Duraturn with the Fanuc Oi works fine with a manual ( not MDI ) turret index and correctly picking up the work offset.

On...

Seriously?
What exactly in a transformer needs a daily workout?
The AL or CU winding?
The Iron or laminated core?
Or perhaps the flux?

I have it set up so the through hole is blocked on the back side. It is then a blind hole so it "should" be flushing properly.

Nope, incorrect thinking! While you may have the flushing, the...

You may be a bit off on either the date of that machine OR the model!

In 1997 Brother was still with the HS3100, HS3600 or HS5100 series.
Then came the HS50A sometime in the late 99 or early 2000...

Len

First off: No E.T. Phone Home! The PC they use has access to the network, but not to the web.
Second, it's my shop and they're my responsibility.
I'll provide the tools necessary, let it...

I absolutely WILL check that out!
Thank You!!!

Can't help you on the Doosan implementations, but..

Endmills are typically Direction 0 as mentioned earlier.
I am guessing M35 is your C axis connect function.
Did you try to put in G17 before...

We'll find out on Jan 2 if the "free" version still works.
Based on the pop-up, it won't.

My ACAD maintenance is with ADSK, it is up to date, but it has nothing to do with draftsight.

I am...

Guys, I have a problem.

I use Inventor and ACAD for all my CAD work. Modeling is done in IV, then immediately a true AutoCAD DWG is created from everything.
They are not dimensioned,...

Check the Automation forum....
And for the record, that is Miguels244!
( get it right before some Dane slaps you in the head for it! )