Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: Froneck

Page 1 of 60 1 2 3 4

Search: Search took 0.02 seconds.

  1. Been busy so I did reply sooner. Yes your...

    Been busy so I did reply sooner. Yes your transformer will work to make 115VAC (As printed on the Data tag) for you controls and yes you can use 2 of the 3 wires of the 3 phase line to get single...
  2. One Insert that gave me great surface finish was...

    One Insert that gave me great surface finish was Komet WOO type. Also look on the web to leard how to grind a Shear-bit, it will work great with HSS and Carbide if you don't have a shoulder. It's an...
  3. You said there was a transformer in the control...

    You said there was a transformer in the control circuit. It could be dual voltage. I don't recommend using 120VAC made from one leg of 230VAC 3 phase and neutral. If you do it will have to be...
  4. Anyone interested in it?

    Anyone interested in it?
  5. What is it? I assume some type of CNC toolholder

    I'm usually buying box lots of items I see something I can use in it. Often I get something included I'm not sure what it is nor probably have use for.
    Can anyone ID the item? Anyone interested in...
  6. Replies
    16
    Views
    1,292

    It is possible Starrett made them for someone...

    It is possible Starrett made them for someone else. I know they made them for Sears. I don't remember too much since it was quite a while ago a friend of mine purchased Craftsman Micrometers, I can't...
  7. Another question about my P&W square head C

    I have the newer P&W model C, the head stock is square and has the up-grades. One being the back lash adjustment on the cross feed screw nut. Simply put is a jam nut that has worm gear OD. Adjustment...
  8. [QUOTE=Clive603;3397561]Doesn't the Model C come...

    [QUOTE=Clive603;3397561]Doesn't the Model C come with a taper turning attachment as standard?
    As per my P&W parts manual both cross slides are shown with taper attachment and without so I assume it...
  9. I did look on ebay but for tapered spindle...

    I did look on ebay but for tapered spindle bushing. Found a few but were too small. What did you search for? P&W parts?
  10. Not sure if this have be posted as there are...

    Not sure if this have be posted as there are soooo many posts on this subject reading them all will take forever. Adding any laws will do nothing, I'm sure the shooters knew they will face the death...
  11. So what your saying is one of the motors is being...

    So what your saying is one of the motors is being tested for use as a generator/alternator. Nameplates for the 2HP motors are the same if my memory is correct, frame size of all the motors the same...
  12. Cap.s used in motors do not have polarity, you...

    Cap.s used in motors do not have polarity, you are correct! The cap. is used to create phase shift. Changing the connection changes the phase relationship and therefore will change the direction the...
  13. I'm wondering if a single phase motor with start...

    I'm wondering if a single phase motor with start and run Cap. and connection to the Caps were reversed. Would the run Cap that's not connected to the centrifugal switch be enough to slow the motor so...
  14. I checked again to see if I had the number wrong...

    I checked again to see if I had the number wrong or one of the other is still there. All are still there. 0719-031-0008, 0007, 0006 and 0005 (first 5 numbers are the same) I was wrong 0006 and 0005...
  15. Question about posible function of motors seen on HGR

    I usually brows HGR's online site. Find some great items, junk too!! I seen an item I'm wondering what might be it's intended use. It's a base plate with two motors with shafts coupled together. 2 of...
  16. I do the same, have a few precut so point only...

    I do the same, have a few precut so point only needs trimmed to be concentric. Also have Hardened and Ground straight shank center I chuck in 4 jaw and indicate to get concentric.
    What I want is...
  17. P&W model C 16" (Square head version) spindle taper

    From time to time I turn between centers. I have the newer model P&W 16" model C lathe in addition to 5 others. My latest job that between centers was needed I was able to do on another lathe but...
  18. Replies
    80
    Views
    4,122

    If I were anywhere there was a possibility of a...

    If I were anywhere there was a possibility of a Grizzly I would not have that slam fire shot gun, I doubt it would do anything at all. 12 gauge Shell is .729" OD 3/4, Sch. 40 pipe is .824" ID. That's...
  19. Replies
    80
    Views
    4,122

    Looking at the video of the Pipe Barrel slam fire...

    Looking at the video of the Pipe Barrel slam fire shot gun I doubt it will do much of anything. When the shooter removed the shell only the brass was left. I suspect the plastic tube burst and the...
  20. Replies
    7
    Views
    649

    Machining soft plastic tubing

    My customer needs ends of soft plastic Tygon type tubing ends tapered and rounded. I tried inserting a steel rod and various methods but none seem to work. Surface must be smooth and easy to clean as...
  21. Replies
    11
    Views
    995

    I have been working on the 1911 Pistol for years....

    I have been working on the 1911 Pistol for years. Best is weights and if the gun is checked weights are used. To get accurate pull weight lift the Pistol with both elbows resting on the bench while...
  22. If it were my lathe I'd lift the carriage off the...

    If it were my lathe I'd lift the carriage off the ways. I had the same Monarch with similar wear though not as far down the Vee. Seems the top flat is also worn. I removed the carriage to find the...
  23. Thread: Sidney Lathe,

    by Froneck
    Replies
    44
    Views
    3,645

    "'lockout for either cross or long. feed" I...

    "'lockout for either cross or long. feed" I assume it's supposed to be cross or longitudinal feed. Most lathes lock out the two feeds when the half-nut is engaged. Some only Longitudinal feed. Both...
  24. Thread: Sidney Lathe,

    by Froneck
    Replies
    44
    Views
    3,645

    Sight glass is easy to make, make them quite...

    Sight glass is easy to make, make them quite often. As mentioned welding lens protectors work good but any clear plastic will do. I make a fixture to put in the chuck, OD about same size as sight...
  25. I had quite a few different Monarchs if my memory...

    I had quite a few different Monarchs if my memory is correct engaging the clutch was done via a toggle. When it goes over center it locks. Sounds like your clutch needs adjustment.
Results 1 to 25 of 1500
Page 1 of 60 1 2 3 4