Search:

Such a nice rifle those coopers, I would think being as high end as they are its a threaded action.? No?

Cooper has a high accuracy claim even with 22lr. 1/2 moa! I would hate to see a can mess...

Picked one up that came with a bench.
Replacing the rusty mount bolts I noticed the wilton base has tapered mounting holes from 3/4-1/2” . Any source for inserts to use? Im thinking the vise...

Are they a decent lathe ? Parts availability ?

Right now i have your basic stanley and crafts man speed square larger 18x22_? and a sliding one. i use a small machinist V block to check blades square to deck and 0'.

I see sets like these ...

Are you DI or sub contractor.
$200 is pretty darn good price.

i dont know how you guys make money on this stuff ?
Tac sol 9mm upper are $90 or so.
Those Di sets , looks nice seen them as high as $500 and $325 ish .

BINGO - Im tired of "gun" violence. None of our politicians want to face Violence head first.
No mention of Pharmaceutical Psycotropic drugs in play. Leaves out pure Anger and Evil.
Tired...

The more info you have the better it works.
Case capacity in H2O
Trim length , bullet weight, length and seating depth .
QL spits out more data than I know what to do with.
So far though its...

How about that grabcad website or SO!IDWORKS?
Im not a machinist so I,have no idea other than seeing these tossed around on DIY build post.

What finish?

Often bubbles in oven cured finishes is contaminated surface.

How about a complete stand alone hydraulic former.
Something like the chamber cut to same as your barrel then you insert brass , have a breach lock device of some sort then have hydraulic...

not sure what your looking for
M1a 16" barrel 7.62 NATO M80 ball ammo shows 11,830psi at the muzzle

not sure what your looking for
M1a 16" barrel 7.62 NATO M80 ball ammo shows 11,830psi at the muzzle

Sometimes , with older rifles the wood has compressed enough not to allow enough "movement" on the trigger to get tbe clearance you need to nave the bolt pass.

I bought it through a group buy on M14forums saved a few bucks.

i like it. Im still trying to figure out the ins and outs. Its come in handy though for looking at different powders and bullet...

I,have quick loads program that gives pressure from chamber to muzzle.
Give me some rifle data and load data and I will enter it and see what spits out.
I cant seem to get screen shots to work but...

Few more places
Obsolete Browning Firearms Parts and Service

You could not pick a harder browning shotgun to find parts for...

That happens , cant get your free time. I do this also.
Theres a lot i will do myself matter not the trade. Although now im older and saving time is more important than money.

Try midwest gun parts they seem to have all brownings old stock?

I have been very lucky when it comes to stuck bullets. I fund if they are just ahead of the throat you can generally drop a heavy rod down into the bore from the muzzle and they pop out back into the...

I finished up a little while ago. Made weight and It shoots as well now as before so that's good....

lost about 11oz trimming down the .750" thick section under the hand guards ...

Im not so sure i did the math right but I basically said to myself
.950 x 10" 7 in3 ( if thats even how you right it)
Vs .750 is 4.4 cuin3 or about 12oz plus what ever I can shave off the 4" in...

thanks, very new to "machine" work. Im no stranger to tools or taking time to learn.

as for the salads..... I had to shed pounds myself as my shooting jacket is defective and it keeps shrinking!

Long time lurker, first post

I have a frankenbuild project. Its being done with parts on hand. My rifle that was legal for the last few years is no longer legal this year in the match I shoot.
...