Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: johnoder

Search: Search took 0.09 seconds.

  1. Hendeyman will have ALL that is needed to know -...

    Hendeyman will have ALL that is needed to know - like that maybe they are not just plain gears keyed to a shaft

    Chart riveted on face of QC box may say both "stud" and "sector" are 48 teeth -...
  2. Probably need to get ALL the covers off so you...

    Probably need to get ALL the covers off so you can decide how its been modified and for what purpose

    I strongly suspect nothing having to do with that timing belt is original Hendey

    And the...
  3. Good to hear. Then the belt drive, however...

    Good to hear. Then the belt drive, however modern, or differing from original, cannot affect the reversing system since it is gear driven direct from spindle - like with both the end gears in this...
  4. Maybe you can comment on whether the spindle is...

    Maybe you can comment on whether the spindle is turning the right way - like the top of the chuck headed your way
  5. Fixing these creatures is terrifically...

    Fixing these creatures is terrifically educational and exceedingly satisfying - but isn't the way to suddenly have a ready-to-go machine tool

    Some day when you are resting, read about the effort...
  6. Not much there to "adjust" Here is Pat's photo...

    Not much there to "adjust"

    Here is Pat's photo of the parts - your somewhat "newer' Hendey may have slight differences
    ...
  7. Reversing is UNDER head stock as shown by such as...

    Reversing is UNDER head stock as shown by such as Patrick Black's photos. If the linkage upgrades do no good, that is where the repair will be

    18 speeds topped at first at 600 plus and later...
Results 1 to 7 of 7