Search:

From what I have read the contacts on the “black cam” have had problems with the contacts failing. And at some point someone has come up with an alternative wiring design using the Allen Bradley...

Try the Lenox bandsaw blades.

Just wondering if others have been knurling on their lathe. I tried it once and didn’t like the idea of putting that much pressure on the crossslide and carriage.

271809[ATTACH=CONFIG]271810

My cabinet is also mounted on the back. I have only seen a couple of other that had the rear mounted electrical cabinet. The side looks similar and has the stop and...

If the other deal doesn’t work out, I can Paypal you upon your reply.

Glad I am not the only disappointed by Lindex lack of quality. It was my understanding that they made a quality part. Ordering a 5/8” and 1 1/16” though Amazon it was Traver that sent the collets....

Thanks to Bill for is his efforts. It all works on the HLV-H for the 1.0mm pitch. Hopefully this helps someone..

Thank you Peter. I cut out the bracket image and used my printer to enlarge the until the measurements match the dimensions on the sheet. I will know tomorrow if it works.

Does anyone have a sheet or link with all the dimensions for machining the metric banjo. I didn’t realize until today that the page for the metric banjo didn’t have all the dimensions for making one.

Bill,
Thank you for the reply. It looks like I need a couple more gears, I don’t have any pairs. And another bracket.

Guys I could really use some help, I spent a lot of time trying to sort this out. I cut a lot of threads internal and external, it was the reason I bought a Hardinge. I am sure the gear solution...

Anyone have a picture or layout for the gears from Dan? I spent all afternoon trying to figure things out and not sure how it goes together for a 1.0 metric pitch.
269531

It took a bit for Amazon to supply all the gears. When I went to start configure the gears and realized the set was for the TL. Does anyone know for sure that the set up works on an HLV. Dan was kind...

A friend of mine had sheet metal pans made to catch the leaks. Works grea!

Boston gear on Amazon is were I just bought gears, they seem responsible priced.

Keep a pad of post in notes by your machine. It helps keep track of things, and they work great to set wheel height. Since my mill is close to my surface grinder, the same thing applies to it. They...

My 612 has the same silicone. Yes, you are missing a plate that covers the way sump casting. There is an allen screw that you can remove to drain the old way oil. The coolant tank is just a slide in...

By chance does anyone have a copy of the gear conversion chart that not on Photobucket that would post it. Or shoot me a pm and I can give you my email address, Thanks

Anyone buy stainless steel from Midwest Steel Supply. Their prices are cheaper then most. Online Metals is 2x the price.

I am looking for some gears for my HLV-H soI can cut m1.0. The gears I need are 127,80, and 50. I also need the metric banjo. My lathe is a 3600 series serial number which is around mid 60’s.
...

When I bought my Harig and pick it up myself, fortunately the shop had fork lift. We put it on an oversized pallet and block in the base screwing 2” x 4” in to the pallet. Sliding it up against the...

Try the guys on Solid Rock Machine on YouTube. He has some good info on accurate grinding and surface finish.

Paul pointed me to the same problem last year when I was having problems turning. Paul point me to the same spot. The retractable slide makes internal threading simpler.

Part of the cost for plating parts has to do with hazardous waste fees.

Mine was rattling and I came across a post about bull gear making noise. Elongating the slots got rid of the noise. I would of sworn it was a bearing failing.