Search:

Ebay may not be issuing 1099Ks or issuing incorrect ones because of errors on their part (surprise!) for some sellers because they may not be including all of the months you were (forcibly!) enrolled...

In blackouts with gas heat I can power the furnace blower/ignition and refrigerator with a very small, quiet generator. That's all I would normally need for a few days. Otherwise a bit larger one...

heating it up is definitely the easiest fastest way to do what you want. wear gloves

RE: the pic of the chopper deicing the wind turbine. I posted it bc I know it would get everyone wound up. It is a thing though:...

https://i.kinja-img.com/gawker-media/image/upload/c_scale,f_auto,fl_progressive,pg_1,q_80,w_800/q6nr83vv29zkycuz3utd.jpg

good to know thanks. It looks like an under 5k machine to me from the (almost useless) photos I have

I'm pretty sure it has linear guides, not box ways.

I JUST found the weight of vmc 15 at 5500lbs, so it must be a bit less than that as I hear a vmc10 is a vmc15 without the enclosure, but I'm not sure it that is true

Not much success with the google, does anyone know? I might have one to bring home in the near future....

I know. Pretty scary for the ground crew though, full shiny fire suits.. Overall length increased 4" from thermal expansion in flight.

SLM NXG XII 600

I hear they have 6 under contract with (I think) VW group

I saw one of these get fueled and fly out a long time ago. It looked to me at the time like the fuel was leaking out as fast as they were pumping it in....

I'm in the managed payments boat as an Ebay store, forced switchover. Of course I use a separate non liked account with no overdraft and keep the balance under whatever purchases I think I would be...

FWIW the encoders are compatible with later display units and there are adapters available for round din-like connectors to the db9 ones, depending on which you have. Also, there is an import...

Yes, I want one of those 4 laser powder bed fusion ones like they use here:
HOME | Athertons
(Click on technology)

I bought the prusa mk3 kit, was 799 I think.

I'm pretty sure there is a reed switch that detects if the magnet is working or not. First make sure you are testing the thing on a thick plate, like thicker than 1/2". then pull out the...

Is the cylinder also generally submerged in a vat of water while testing- just in case?

I doubt they test there, probably send them somewhere...

I just ended up with a pneumatic over hydraulic 10,000 psi hydrotest unit, and after reading the destructions about filling the vessel to be tested with water and bleeding off any trapped air got me...

I have it in my office area 8' from my desk and there is little to no odor (I print PLA only, and then less that about 9 hrs a week, in an open floor plan home) It is also quiet enough even when not...

If you are going to use it only 4 hrs a month I would think electric would be a bad idea from a battery charge maintenance perspective. They are more designed for shift work. Maybe one with a...

VFD must be programmed for the correct number of motor poles. Not sure if that is the issue though...

I have a 40x60, 11' at the sides (under the iron) and 14' at the peak, 4" of insulation and metal over that on the walls. 5 ton conventional ac works fine, northeast ga. I put the foil lined bubble...

high you say? (I don't ever really roll it around, and its secured in place so it can't get pulled over...)