Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: Jersey John

Page 1 of 49 1 2 3 4

Search: Search took 0.25 seconds.

  1. FS Deckel FP2 / FP3 Coolant / Suds Pump NEW

    Hi folk

    Deckel FP2/FP3 Coolant / Suds pump bought NEW from Franz Singer and never fitted. P/n.2001-544

    272548 272549 272550

    Payment by PayPal

    John :cheers:
  2. Thanks for your input Peter - always appreciated...

    Thanks for your input Peter - always appreciated :)

    John:cheers:
  3. ... and that is certainly on the cards. Having a...

    ... and that is certainly on the cards. Having a few issues with Tristar Corp but now looking at several other supplier outlets too ;)

    Your comments are appreciated and always welcomed - Thank...
  4. Hi Dennis - We're talking about the bottom /...

    Hi Dennis - We're talking about the bottom / lower rail. But if the cam presses on the opposite side then that's not an offending item.
  5. Well FOD certainly wouldn't help but the main...

    Well FOD certainly wouldn't help but the main chewed bit at the outer end shows very regular damage like the gib pressing down on a wood screw thread (and there are none of those inside ;))

    The...
  6. Hi Ross, Peter et all Withdrew the bottom gib...

    Hi Ross, Peter et all

    Withdrew the bottom gib this morning for inspection.

    Firstly - thanks to Peter for the tip on keeping the table locking bar in in place. I used a 300mm length of 20mm x...
  7. Definately needs more investigation Siggi...

    Definately needs more investigation Siggi :confused::crazy:
  8. Replies
    9
    Views
    510

    Hi Dennis - Thanks for your comments :) For me...

    Hi Dennis - Thanks for your comments :)

    For me the door side was the natural choice as it was clear and unlike some I didn't have to relocate the coolant/suds system.

    On the Op side the...
  9. Hi Dennis - yep it's really annoying that goal...

    Hi Dennis - yep it's really annoying that goal posts keep moving from end to end. What was your definative fix?

    John:typing:
  10. Replies
    9
    Views
    510

    Hi Ross Thanks for your comments:) I have...

    Hi Ross

    Thanks for your comments:)

    I have to say the Newall system was a pleasure to fit and yes Newall advertise heavy wear to their rails and back their system with a 5 year guarantee which...
  11. Replies
    9
    Views
    510

    Morning Thanos Thank you for your comments and...

    Morning Thanos

    Thank you for your comments and observations:)

    I must confess that I had completey overlooked the possibility of needing to mount the Deckel DH but that said although I have one...
  12. Replies
    1
    Views
    215

    WTB Turcite B or Rulon 142

    Hi folk

    Can anyone sell me 6"x16" (0.062") of Turcite B or Rulon 142 to cover three gibs on a mill.

    No worries about shipping costs to Europe, it can be shipped to CA :)

    MTIA

    John:typing:
  13. Replies
    9
    Views
    510

    Finally the "Z-Axis" ... this was a 50/50 choice...

    Finally the "Z-Axis" ... this was a 50/50 choice left or righthand side. I've viewed various person's fittings and decided on the righthand side. Again I used two existing tapped holes below the axis...
  14. Replies
    9
    Views
    510

    Next was the "X-Axis" ... again I used existing...

    Next was the "X-Axis" ... again I used existing holes to mount the reading and only had to drill one hole for the lefthand rail mounting post.

    272246 272247 272248 272249 272250

    John :typing:
  15. Replies
    9
    Views
    510

    Deckel FP2 Newall DRO Fitment

    Hi folk

    While I'm still having issues with the X-axis on my recently aquired FP2 I've used some time to a DRO.

    Having looked at DRO systems over the years I've always shied away from fitting...
  16. Over the past month I've managed to use the Mill...

    Over the past month I've managed to use the Mill with no powerfeed to the X-axis while awaiting some Rulon-142 to recover the gibs (another story).

    Today I eased both the X-axis gibs by half a...
  17. Well here's an English HLV-H control box but some...

    Well here's an English HLV-H control box but some is NON standard.

    271982

    My machine was produced as a "One off" for the German market and has a THIRD speed range from 40-250 RPM.

    Enjoy
    ...
  18. Replies
    930
    Views
    79,460

    Hi Dennis - Don't know if it helps but Franz...

    Hi Dennis - Don't know if it helps but Franz Singer tells me they use RAL7005 (Mouse Grey) as their stand grey machine colour.

    HTH

    John :cheers:
  19. Hi Siggi - Thank you very much for your input :)...

    Hi Siggi - Thank you very much for your input :) I'll keep your notes ready should I need them.

    I've tried to find parts diagrams :( and images and simply can't!

    I'm awaiting a new material...
  20. Thanks Peter - really appreciate your comment. ...

    Thanks Peter - really appreciate your comment.

    Have a good weekend

    John :cheers:
  21. Afternoon all. Well the repaired Operator's...

    Afternoon all.

    Well the repaired Operator's End Cap is now re-fitted and the manual operation of the "X" feed feels smooth from end to end.

    I have removed the top X-axis gib strip and eximined...
  22. It may be a quite reasonable move if I wanted the...

    It may be a quite reasonable move if I wanted the mill out of action but it's in daily use and as I've never had an issue like this so IMHO its a question worth asking from those that have done it...
  23. Nice one Thanos! :) Appreciate your...

    Nice one Thanos! :)

    Appreciate your investigation and comments

    John:cheers:
  24. The quick answer is "Too thick" as the gibs don't...

    The quick answer is "Too thick" as the gibs don't seat far enough in.

    As yet I've not attempted to remove it from the gib so I can't say.

    John:typing:
  25. Hi Ross et all Already had a reply from...

    Hi Ross et all

    Already had a reply from Tristar, they don't have a European distributor ... but they can supply.

    They currently stock between .015-.125" thick ... So gent's what thickness would...
Results 1 to 25 of 1210
Page 1 of 49 1 2 3 4