Search:

Not that its not possible, but the couple times I've had to make a special tool, I started with a bar that already had its pocket, then "butchered it " into something that would work.
I remember one...

Manual should give the sequence to command tool pot up and down motions
What control?

You may want to post in cnc section

Stop by your local 1 man auto repair shop.
Used disk brake rotors
Offer a case of beer for a load

I'm interested in the Mitutoyo 368
pm on the way

Besides the amperage, you'll need to figure out whether you have size 0 or size 1
Probably the mounting ctr/ctr or the width of the heater
Goooogle is your friend
Quick search of Fleabay found...

I'd 2nd the Bilco door or similar

What are you going to do in 10-15-20 years when you move/? and need to get it back out?
Gravity will be waiting for you

If your lucky inside the switch cover there should be a decal that lists all the different heaters.
If not look up/Gooogle the switch/starter numbers and you should find a chart


Found this
...

I wondered when the elephant in the room would surface

How does it perform with led lighting?

I've started converting the shop to led lights and afterwards noticed pics I would take were blurry/fuzzy that I attributed to coffee or haste.
Took the...

When I first looked at the drawing and all the "what if this happens, can I save it" I wondered, do you have a sample of one that meets ALL of the criteria of the posted drawing?

May not help the op but here's what I did about 30 years ago.
We have a cathedral ceiling 12' at peak in master bedroom.
Roof is only about a 4/12
Rafters are 2x8 16 ctrs
dbl 2x6 cedar collar...

Regarding my above post #5
The cam thickness at 0/360 deg is 0.450
All of the measurements of cam movement were only the changes from the original zero reference

I've also used that method, and I believe that it works as it prevents the sudden change/increase in feed created when you break thru regardless of how well you try to maintain a constant feed.(when...

Data from a Green #8 cam in inches

0 0.0000 index hole @ 6 o'clock
10 0.0071
20 0.0283
30 0.0527
40 0.0778
50 0.1028
60 0.1302
70 0.1558

All of the references I've seen and the few videos of the operation state the green cams and green index marks on the chuck are for right hand drills
Unfortunately my copy of the manual is so faded...

I have the same saw and when I found mine it had been sitting in a field for months.
Took a lot of penetrating oil to get the saw to change from a straight position.
I had the base bead blasted and...

Someone else can confirm, but I believe Vidmar drawers can be removed without tools, which would reduce the weight to move it.

If you purchase a used Vidmar and there's no key provided, the key...

Power supplies spoken for

PM on the way to fciron re IP-132

Lab power supplies


Probably stretching limits of this section, but I've seen enough posts about fixing electronic controls, someone may be interested.

Cleaning up the shop and these just keep...

Vacs sold
Thanks M ichaelP

MichaelP
It's yours
I'll pm later for payment details
Mike

Pistol grip is also multi directional although not label as such.
The "spool" inside is removable by hand and reinstalled in the opposite direction to change air flow
There are no part #'s to...

Pm sent regarding above

(2) Royal PneuVac Shop Air Guns and bag for sale

Pistol grip is vac only has been used but still in vgc for what it is

Other is vacuum/blow switchable, except for hooking up once, is in new...