Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: michiganbuck

Search: Search took 0.04 seconds.

  1. I used to keep a drop-in long spacers to my long...

    I used to keep a drop-in long spacers to my long travel that I would drop in for my dress, , so to go back to the very spot. That way I could see my dress down dial to tell the wheel wear from the...
  2. Supose you wanted to travel to a certain place to...

    Supose you wanted to travel to a certain place to dress..could go to, and later go to tha same place again on long travel?
  3. if 5 imp That is way to fast for creep feed...

    if 5 imp That is way to fast for creep feed grinding.

    Does the machine have a long travel stop..say you wanted to go to a certain long position traveling to the left to the stop on the part....and...
  4. I haven’t run a specific creep feed machine...

    I haven’t run a specific creep feed machine except for electrolytic grinding.
    With that I watched an ohm’s meter and ran the feed up to a certain draw. It was at the resistance that would just begin...
  5. Doing flat form tools we had to come down only...

    Doing flat form tools we had to come down only (with long traver) so I got a lot of hours doing that...
    Some decent grinder hands never do that and often take a long time to get much done.
  6. QT:[a closer up shot of the controls too in case...

    QT:[a closer up shot of the controls too in case anyone wanted to see a little more what was on there.]
    Guess I would have to read the manusl to understand the controls.
    Can you long travel and...
  7. One day you run out fun things to do wet full...

    One day you run out fun things to do wet full wheel bottom grind across a part and vary down feeds from strating with .0002 and try to go to .002 per pass and see how you grinder pulls that load. ...
  8. I like to use a big hone fine side but little...

    I like to use a big hone fine side but little honing. Qt: {reclean with acetone and lint free paper towel} never did the acetone thing.

    For some jobs down grinding can save time. Eliminating much...
  9. In the old ,old days guys would hand scrape the...

    In the old ,old days guys would hand scrape the lead, or brass thinking that might give better holding. Some thought it would cause less loading of the wheel so less chance to burn a chuck...Nobody I...
  10. To what number place does your DRO tell? I...

    To what number place does your DRO tell?

    I passed a 824 that just needed a belt for $100 because I had no space and don't need more grinders...
  11. Interesting machine with no down hand-wheel...Let...

    Interesting machine with no down hand-wheel...Let us know how the Dial a size works..Never ran a micromaster with having that.
    Good find for $100

    Back in the day I practiced a dial a size hand...
Results 1 to 11 of 11