Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: Sinij kot

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Was wondering if you had the photo of the damaged...

    Was wondering if you had the photo of the damaged daughter board and FET. I have a drive MDS -B-SP-110 with the same symptoms. It is getting power but doesn't power up. The fan was caked up and...
  2. Videos

    Edster, the videos are not available anymore. Any way you can repost them? I have similar plastic (Nylon) application and was thinking of using this vise. Concerned with plastic flowing out in the...
  3. Gobo, Thank you for the info. Tried it...

    Gobo,

    Thank you for the info. Tried it yesterday and it works perfectly. I just have to figure out how to control the Z position.
  4. Posted at the same time as you were responding. ...

    Posted at the same time as you were responding. Does the position 1 and 2 correspond to P17 position setting?
  5. Thank you for that! Looks like M901 and M902. ...

    Thank you for that! Looks like M901 and M902. Now I have to figure out how to use it.
  6. T plus tool change position P17 not working on Integrex 35Y

    Hello, we have a Integrex 35Y machine and have to alter tool change position to clear work with Large OD. When I change the P17 parameter to 4 and tell it where the new change position needs to be...
  7. Yea, I'm not sure what is causing the failures,...

    Yea, I'm not sure what is causing the failures, the wiring seems to be in good order, maybe excessive ripple on the powersupply. Had another one die couple days later. This one controlled the tool...
  8. Got it fixed. Turned out to be a failed...

    Got it fixed. Turned out to be a failed optocoupler on a relay driving the door interlock circuit (CR26). It is a socketed DIP-8 part, just pull it out, put a new one in and all is good.
    Funny...
  9. Cincinnati Arrow door lock stays locked, need help

    Hello,
    I've been running the Arrow 1000 for few years and last week while face milling an aluminum part it popped out of the vise and craw-bared the spindle. Lucky the drive belts were the weak...
  10. Replies
    1
    Views
    881

    Hello, I'm looking for the same connector and...

    Hello,

    I'm looking for the same connector and was wondering if you ever found a source for them. On my board the pins actually burned out right between the header and the board. I can salvage it...
  11. Replies
    10
    Views
    5,778

    Thanks for the help again guys, I got the...

    Thanks for the help again guys, I got the toolchanger working. Now I need to figure out how to change this machine from mm to in.
  12. Replies
    10
    Views
    5,778

    Thanks for the help guys. I managed to get a...

    Thanks for the help guys. I managed to get a successful tool change. Still have to experiment to figure out the procedure. I originally thought that I would load the tools into the ATC magazine...
  13. Replies
    10
    Views
    5,778

    Got it! I'll check the tool definition table. I...

    Got it! I'll check the tool definition table. I figured since the tool changer has preassigned tool types and it is not possible to install the wrong shank type the current tool definition table...
  14. Replies
    10
    Views
    5,778

    Hello, We have a 1997 Integrex 35Y and ran into...

    Hello, We have a 1997 Integrex 35Y and ran into exact same issue trying to figure out how to set up tools on this machine. We have all the manuals in English but so far were not able to find clear...
  15. Replies
    5
    Views
    9,013

    Oh man, that chuck removing fixture just made my...

    Oh man, that chuck removing fixture just made my day. I'll be making one pronto!
  16. It turned out to be the motor as I suspected. ...

    It turned out to be the motor as I suspected. The replacement motor produces great finish although it also has this pole jumping feel to it but to much lesser degree. I'm going to replace it with a...
  17. So I disassembled the ball nut and cleaned it all...

    So I disassembled the ball nut and cleaned it all out, there were chips in there as suspected. It was actually quite easy to do; just have to keep track of the ball sizes and split them up evenly...
  18. AC servo rotor jumps when turning by hand, how bad is the damage?

    Hello, I've been chasing finish problem on my CNC lathe and noticed that one of the axis motors doesn't turn smoothly compared to the other motor but instead jumps between poles and feels like a...
  19. I think I might have found a source of the...

    I think I might have found a source of the problem.
    When turning Z-axis screw by hand I felt little jumps kind of like turning a shaft of servo motor and the rotor jumping between poles. Long...
  20. I did that yesterday and I had no backlash...

    I did that yesterday and I had no backlash whatsoever. Set the hand-wheel on 0.0001" and even a single click goes out one and comes back to where it started.
  21. The full rapids sound good to me. I will disable...

    The full rapids sound good to me. I will disable the hydraulic pump to cut down on ambient noise and listen again.


    Yes it is. I will go back and look closely at the rails for indentations. ...
  22. Well I did some mechanical testing and was...

    Well I did some mechanical testing and was actually secretly hoping that it is just a thrust bearing on the Z-axis as that made sense. The results I believe are acceptable but correct me if I'm...
  23. ewlsey, thank you, I will do that tonight. I was...

    ewlsey, thank you, I will do that tonight. I was just reading another post where that was suggested.
  24. CNC Lathe cutting rough arcs, need help troubleshooting.

    Hello, I'm working on 1995 Supermax TC-2 cnc lathe. I recently purchased this machine after it has been sitting for around 5 years and the previous owner working on it on and off trying to repair...
  25. Replies
    211
    Views
    18,499

    Milacron, I tried sending you a PM but your mail...

    Milacron, I tried sending you a PM but your mail box is full. I have a favor to ask you about Bridgeport 412.
Results 1 to 25 of 32
Page 1 of 2 1 2