Search:

Forty years ago we used ADAPT and a IBM drilling program called Autospot. Aerospace company.

Thanks for all the replies. I went with the Hammer. They had a summer 20% off offering. I got the spiral cutter head. The shipping and follow up and overall help from Felder USA has been first class....

I have one and McMaster had the best price at the time since it included their dust vacuum setup.
Really good cabinet.

Have that same collet chuck. I just reset as needed. DO NOT loosen the from mounting bolts and you will be fine. It's not necessary, the adjusting screws will move the chuck body.

Hope this helps !

I have their cut off tool and it works very well. 1/6" and 1/32" blades.

https://www.arwarnerco.com/

Looking for a combo jointer/planner combination for home shop use. Stick with the Hammer brand or are others just as good ?

Check McMaster Carr

I was a machinery repairman on a sub tender. Sections of track were removable for above and below deck hatches. We did not run the machine shop when at sea the few times we left port. On the other...

I built a 12' x 16' and a 10' x 12' shed/ building and have standard style 5 foot wide tracked sectional doors on both.
Wayne Dalton and Overhead Doors have them. I forget which one had them from 3...

rigidax tooling compound

I've used this Ebay seller, 6061 Dude ( Stoner Tools and Raw Materials )

I've been using Mobil Rarus compressor oil for over 20 years with good luck.

Hi All,
Does anyone know if Autocad LT 2012/2013 will run on Windows 10 ? Need to upgrade my computer and trying to decide to stay with Win 7 Pro. ( preferred choice ) or go with Win 10.
Thanks !

I have several of their readouts. Call them, they always answer the phone and ask them about your question.

If you don't have one,get a puller to remove your new adapter. Sopko will have the correct one.

I'd like the Eclispe v-blocks . Shipping USPS flat rate box ?
PM me. Thanks !

There is a little band wrench that is missing from your set that you use to loosen the caps. If being very careful you could try the holder attachment and try that as a last resort.

I'd be afraid the oil would collect grinding grit/dust. Remove spindle and store elsewhere until needed ? I store mine out of the bearing since I don't use it that often.

Thanks ,Ken

Definitely a BA860 on the tag and it is a tool and cutter grinder.
I'm sure I can go by the ones you let me know about.

Thanks again !

Hi All,

Picked up a K.O. Lee BA 860 grinder today. Would anyone have a parts or instruction manual available ? Grinder is in good condition and plan to restore. Did some internet searching, no...

That almost looks like a coarse aluminum oxide blast finish ? Try that ?

I've been using McMaster Carr # 1216K15 synthetic for several years and have been happy. No bad sump problems. Infrequent use of my grinder ,too. Worked good on grinding the Robin Renzetti type...

That was the automatic oiler on my 15XT with linear ways. 1998 ? Don't remember.

Good luck with everything !!

I'm sure the supplier to McMaster will hear about it. Years ago they did a three way phone call with me and Rigid on some defective left hand pipe thread dies so I could explain the problem. First...

[QUOTE=Bob-J-H;3152713]I have that lathe, I believe mine is L00 mount. Bob[/QUO

Mine had the same as above.