Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: Sub-Micron

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds; generated 9 minute(s) ago.

  1. Thank you.

    Thank you.
  2. To close the loop and possibly help someone else....

    To close the loop and possibly help someone else.

    Problem was solved by loosening the guide blocks and loading it in a way which increased the play. Then placing it in the middle of travel with...
  3. Please send me a copy if you find one. I have 3...

    Please send me a copy if you find one. I have 3 model 37s.
  4. Elox/Fanuc Wirecut Series O Slop in V Axis

    I'm trying to solve a slop/excess clearance in the V axis on my machine. I was having problems aligning the wire and discovered this issue. There is enough slop that you can actually hear it when...
  5. Replies
    0
    Views
    470

    Mystery Tool and Cutter grinder

    Anybody know what this is? Looks well made, but I see no identification marks/labels.

    269943

    Thanks,

    Roger
  6. Replies
    0
    Views
    613

    Lapmaster 15C Repair

    Hello All,

    I recently purchased a Lapmaster 15C from a local shop. When running it makes a ticking noise which is 30 times per table rotation. The gear reducer is 30:1 so the noise is 1 per...
  7. Replies
    194
    Views
    27,210

    You can't teach a dog to play the piano.

    You can't teach a dog to play the piano.
  8. Replies
    194
    Views
    27,210

    Well put. May I quote you on another forum?

    Well put. May I quote you on another forum?
  9. Replies
    26
    Views
    2,686

    I have been looking at the Epson labelworks Epson...

    I have been looking at the Epson labelworks Epson LabelWorks LW-600P App-enabled, Portable Label Printer with Bonus 1" (24mm) Tape Cartridge...
  10. Help Please: Fanuc Spindle Servo Problem

    Hi All,

    I'm have a bit of a problem with my Kitamura MC1 with Fanuc Spindle Servo Driver A06B-6059-H003. I'm showing AL-19 on the unit itself. No errors on the 0M-B control.

    Done so far:
    ...
  11. The thickness of the example is .023" Actual...

    The thickness of the example is .023" Actual part will be .032"
    It is not a high heat application. The watering can is a similar application. (I can't go into details due to a NDA in place)
    Not a...
  12. Please Help Identify this joinery process.

    Hi All,

    This is my first post in this sub forum. I mostly post in the CNC machining sub forum.

    I have a project that requires I join a SS tube to a SS cylinder. The material is 316SS or...
  13. Tram the table and report back what you find.

    Tram the table and report back what you find.
  14. Thanks to all for replying. After much searching...

    Thanks to all for replying. After much searching on the web I have found it. Don't know why they didn't mark it somehow. Fortunately, they still make it and sell spare parts. Just to button up the...
  15. Please help identify this small arbor press

    Hi All,

    I need to get a pinion gear/ Handle for this arbor press. I can't find any markings to identify it. Hope someone has one and can help.

    Thank you.

    99705
  16. Replies
    21
    Views
    7,419

    Index before turning if possible or economical?...

    Index before turning if possible or economical? Are there ops before this one?
  17. DOC is a little shy, but close as I could find. ...

    DOC is a little shy, but close as I could find.

    https://www.mscdirect.com/product/00031872
  18. Replies
    26
    Views
    5,466

    Try using G92 for now. It's "old school", but...

    Try using G92 for now. It's "old school", but might get you going.
  19. Ditto here as well. hopefully awaiting a solution.

    Ditto here as well. hopefully awaiting a solution.
  20. You could try a rs232 tester that goes inline...

    You could try a rs232 tester that goes inline while your hooked up to pc. Mine has switches which allow changing the cable configuration on the fly. They also have red/green led lights to help...
  21. Replies
    31
    Views
    8,423

    Re: Broken Set Screw!! Please Help!!

    What you're calling a collet, I call a bushing. You should be able to unbolt the toolholder from the turret. Take it over to a manual mill, chuck it up in a vice and drill it out. You have a better...
  22. Replies
    31
    Views
    8,423

    Re: Broken Set Screw!! Please Help!!

    You might try knocking the stuck drill body the opposite direction it was forced in a little to possibly relieve some of the pressure. If you can. This might make it easier to get the set screw out.
  23. Re: Thread milling more than diameter with same tool?

    Yes. As long as you have the LOC.
  24. I call them up to see if they had one which would...

    I call them up to see if they had one which would work for my machine (small gang tool), they said they are currently working on a larger one as well as a smaller one. Looks like the smaller one is 8...
  25. Just pulled the trigger on the micron-eme. ...

    Just pulled the trigger on the micron-eme. Bought it direct from their website as opposed to ebay. Don't need the smart bar stopper.
Results 1 to 25 of 91
Page 1 of 4 1 2 3 4