Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: rke[pler

Page 1 of 60 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    14
    Views
    739

    If it was like my Famco there's not a lot of the...

    If it was like my Famco there's not a lot of the pinion not in engagement with the arbor. On mine there was maybe 1/8" on one side and maybe double that on the other (where the cuts for the teeth...
  2. Replies
    14
    Views
    739

    Just checked the teeth on the arbor as they're in...

    Just checked the teeth on the arbor as they're in better shape. The whole depth is .219 instead of the expected .269 for a .060 difference, so it's definitely not a clean 8DP gear. Setting a gear...
  3. Replies
    14
    Views
    739

    I've seen something like that on the Hardinge...

    I've seen something like that on the Hardinge gears made for the HLVH and also used in the helical milling attachment on the UM mill. This seems to be the other way - a gear cut in a smaller...
  4. Replies
    14
    Views
    739

    Yeah, I called them and they want near $600 for...

    Yeah, I called them and they want near $600 for the pinion. It's a nice part and seems well made but that almost twice what I paid for the press so I'm motivated to spend a day or so to make a...
  5. Replies
    14
    Views
    739

    The problem is that the teeth on the pinion are...

    The problem is that the teeth on the pinion are really mangled from applied pressure. The diameter measurement is from an area that is the original pinion diameter, you can't measure over the teeth...
  6. Replies
    14
    Views
    739

    Pinon gear for Famco arbor press

    I picked up a well used Famco 31-C arbor press at an auction, and just completed disassembly (it was frozen and needed much high-impact love). After pulling the arbor I found that the teeth were...
  7. Replies
    6
    Views
    475

    A bunch collected here: How many 3 point...

    A bunch collected here:

    How many 3 point follow rests were maed for monarch 10ee's?
  8. Polished, maybe, but not lapped. I'd be careful...

    Polished, maybe, but not lapped. I'd be careful with the area under the head as that's the point of contact with the .200 head. I didn't gage the hole in the head but could if you need it, the pin...
  9. You ok with a pic and description? 318355 ...

    You ok with a pic and description?

    318355

    Pin is .750 long, body is .083, head is hemispherical and .140 diameter and the hole for the spring is .039 (or so, there's a burr on one side) and...
  10. Replies
    12
    Views
    785

    The MG drive was an option from Monarch well into...

    The MG drive was an option from Monarch well into the 50's. A lot of the EEs ordered by the Navy in the 50's seem to have been MG units (ironic considering that the C16J's would have been pretty...
  11. Replies
    36
    Views
    2,149

    It's not like Monarch never said anything: ...

    It's not like Monarch never said anything:

    http://www.kepler-eng.com/images/10ee_lift.jpg
  12. Replies
    5
    Views
    407

    Just shim it out a few thou and cut again. Using...

    Just shim it out a few thou and cut again. Using the standard E shim with a double layer of aluminum foil will cut another .004"
  13. Replies
    38
    Views
    3,624

    When I built I put in a 30x60 shop and framed in...

    When I built I put in a 30x60 shop and framed in the back half for a 'clean' machine shop with HVAC. That let me put in a lot of insulation and keep the machine shop hot/cool (really just constant)...
  14. Replies
    38
    Views
    3,624

    Nice to hear from a man with his priorities in...

    Nice to hear from a man with his priorities in order.
  15. Replies
    12
    Views
    981

    I'm not sure that they're made to be adjustable...

    I'm not sure that they're made to be adjustable so much as replaceable. One feature I did nothice is that the tapped hole in the quill is not tapped through so the stop can't be screwed in much more...
  16. Replies
    3
    Views
    430

    You might consider a posting in "Machine...

    You might consider a posting in "Machine Reconditioning, Scraping and Inspection" since your request covers pretty much all of that. I have to warn you that sometimes you're opening a #10 tin of...
  17. Replies
    22
    Views
    3,938

    If you ever draw that up I'd like to see the...

    If you ever draw that up I'd like to see the plans, even something very rough. Looks handy.



    That's pretty normal. I think you can find the expected bore reduction in tables (here?...
  18. Replies
    12
    Views
    981

    It looks like the original quill have a...

    It looks like the original quill have a replaceable scale? Never say that (or likely just never noticed). Also, the metric scale seems kind of handy.
  19. Replies
    12
    Views
    777

    Straight flute taper pin reamers have to be...

    Straight flute taper pin reamers have to be cleared of chips a lot. If you have a change get spiral flute - those are made with a left hand spiral and right hand cut so they eject the swarf out the...
  20. Replies
    12
    Views
    981

    They're on the drawing and so original, part...

    They're on the drawing and so original, part number EE-1373. I added those to mine, making the screws from A2 and hardening them as I suspect they'll have to take some abuse.

    I pulled my old...
  21. Replies
    12
    Views
    981

    With an old machine the bore in the tailstock...

    With an old machine the bore in the tailstock might be too worn for a 'standard' size to work. Used quills could also show wear and your combination might be the worst of both.

    Here I cover most...
  22. Replies
    12
    Views
    871

    Jeeze, I don't think I've see the old indicator...

    Jeeze, I don't think I've see the old indicator holder and bed attachment but maybe once on eBay, and here you have both the right and left hand versions. Neat!

    I've still got some blank castings...
  23. Replies
    17
    Views
    1,088

    If your blackplate (or chuck, for that matter) it...

    If your blackplate (or chuck, for that matter) it hanging up on the taper and never registering on the spindle face you're going to have all sorts of problems. I would expect that nutation would be...
  24. Replies
    12
    Views
    871

    The original carriage stop was a work of art: ...

    The original carriage stop was a work of art:

    315090

    By 1944 they'd gone to the little dovetail (with some weird-ass angles, 25 deg or something like that) on the end of the saddle and the...
  25. Replies
    12
    Views
    871

    That's an indicator mount for a post-60's...

    That's an indicator mount for a post-60's machine. I don't recall ever seeing that one on an old WiaD drive machine but always on the modular drive. The one you need looks like this w/o the...
Results 1 to 25 of 1500
Page 1 of 60 1 2 3 4