Search:

thank you L is password

hello i would like backup PMC parameters by rs232 from Mori seiki Sl250 but
I can not enter ladder and pmc parameters, shows me, enter the password
please help 271332

where I should look

i have problem with my Mazak SQT10M with turret ,Control T plus

in manual mode turret works Ok
but in mdi not works good for example T0101 and then T1212 not works
turret rotate several times...

need electrical diagram for lathe Cincinnati TC150M or TC150 or TC200 i think its the same,
Control Fanuc 21iT
please help i can pay by pay pal for scan
emeil
[email protected]

problem with tailstock error not disappears ,tailstock travel left and right but error not disappears,sensors works,how find this Null punkt or turn off this 263037

Graziano(gildemeister) Fanuc...

solve SET UP Manag. Chuck Valid/Invalid was Invalid now everythings works thanks

262577

262578


everything works but i cant clamp and open chuck hydraulic
m6,m7 works
foot pedal works

solenoid when I press it works

hi guys
i bought an Integrex 100Y mazatrol 640mt and i have a problem with chuck
shows ok when I press the pedal, but hydraulically it doesn't open the chuck, nor through the code m6 and m7 but...

parameter 22 00000111

261153
in machine is everything write like on the photos
parameter 1 is wrong becouse when insert this parameter MDI not works
i set bit 1 and 2 to 1 and the works mdi

261148261149261150261151261152

Fanuc send me original parameters like my but still Alarm 581
also not works Edit mode,in the DGN 122 when switch key for edit left and right works and bit is changed 0 to 1 so its works
works...

hi guys
I have a problem with the MC010 Fanuc OM-A without a ladder
Axes work, spindle works (M3 AND M4 with S works good), m19 works , but when I give M6 T... then I have error PS 581...

parameter 8184/8185 is 0

software 0460-03
PMC;4001-01
parameter 4
01111001
parameter 35
00000000
parameter 100
2
parameter 8123/8124
10000

check tommorow parameter and let you know,how check version?

thank you for reply
ok please check

hi i change servo motor on the X axis and i have problem

on the machine shows on the desktop 1 mm shoe on the sensor 0.8mm
old damaged servo motor was 3000 pulse encoder but new one have 2500 on...

hi
please help
which parameters respond for positioning spindle Sinumerik 810D on DMU 103V
i change bearing and for changing tools a have change positioning spindle 257734257735

something is defect on card RK124 Sp150

I checked the phase at the input of the spindle drive and there is a difference
I checked the amps during work
one phase has a drop of 1 ampere less on the spindle

parameters spindle are Ok
I checked and agreed with the originals
I will let you know tomorrow, I will check the phases

hi
please help MDS B SP 150 Spindle MAZAATROL T PLUS

i have Problem in my cnc lathe mazak Qt10 2 axis,problem is when spindle start from 0 to 3500rpm,
slowly start good to max rpm and is...

i need help with my mori seiki DL15Y Fanuc Control
i cant ref Y axis is any procedure for this????251403