Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: M K

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Hi Yes definitely, it’s a rock solid machine...

    Hi

    Yes definitely, it’s a rock solid machine and can be picked up for sensible money,

    Yeah I’ve chased a few issues since I’ve had it and the issues took longer than they should of to sort out...
  2. So I ran 600 continuous cycles last night and had...

    So I ran 600 continuous cycles last night and had no chuck errors

    :D
  3. Ok so heres an update I asked the seller of...

    Ok so heres an update

    I asked the seller of the spare board if it was known to be working when removed and they said it was as far as they were concerned so i decided to take another look at the...
  4. So I got the eBay board from the USA today and...

    So I got the eBay board from the USA today and fitted it to the machine but it doesnít work at all!!!

    When fitted and powered on I just get a ďbreaker tripĒ alarm on the screen and canít turn on...
  5. So ive got the machine to stop tripping the...

    So ive got the machine to stop tripping the breaker and it is definitely something to do with the same chuck and un chuck relays so could be board related still

    It had damaged the unchuck relay...
  6. Yeah the board from the states used is about £100...

    Yeah the board from the states used is about £100 delivered so i have just bought one on ebay but again delivery will be around 2 weeks but hopefully sooner, the other new parts are still on order...
  7. Afraid not as I didnt see see which 1 it was he...

    Afraid not as I didnt see see which 1 it was he traced it back to

    Here’s the board

    305493
    Thanks
    Marc
  8. Going back to the chips that I’m replacing on 1...

    Going back to the chips that I’m replacing on 1 of the main boards, I just checked and it is the MC323 board

    There’s a few on eBay and they are cheap, does anybody know if this is a standard part...
  9. On my Hyundai the rotation isn’t that quick to be...

    On my Hyundai the rotation isn’t that quick to be fair,

    I’ve seen a Hyundai hit15 running and it was at least 3 times faster

    The problem I sometimes get is it must be the valve sticking, as it...
  10. The machine is still working so it’s not the end...

    The machine is still working so it’s not the end of the world, if I can’t solve the issue I will just live with it for what the machine costs me, and plod on with it, but hopefully new chips solve it...
  11. On 1 of the PLC boards, the wiring diagram just...

    On 1 of the PLC boards, the wiring diagram just calls them Y07 & Y08 as seen in this picture

    305226

    I don’t have the actual chip part numbers I’m afraid but they have ordered them now anyway
    ...
  12. It goes beyond my capabilities to start trying to...

    It goes beyond my capabilities to start trying to trace things and in depth fault finding so i had someone come in to look at it today from an electronics repair specialist 3 units down from me,
    ...
  13. Ok So The dc voltage converter was putting out...

    Ok

    So The dc voltage converter was putting out 24v exactly at the output terminals so I adjusted this to 25.3v at the terminals.

    The voltage adjustment did make a difference to some relays but...
  14. I’m very basic when it comes to electronics, ...

    I’m very basic when it comes to electronics,

    Is there any guidance on where or how I’d start to see if anything on that pcb was leaking to ground?

    Thanks
    Marc
  15. I did meter the + & - from the little silver AVR...

    I did meter the + & - from the little silver AVR unit which supplies the 24v DC above the relay boards, and measured at the terminals it was exactly 24 volts but as said when I measure across the...
  16. Voltage to coils reads 21v dc (coil is 24v dc)...

    Voltage to coils reads 21v dc (coil is 24v dc) Could that be enough to do it?

    I fitted 2 new 110vac coil solenoids to the chuck/unchuck directional valve and I also tried new spark killers...
  17. So today I had 2 new sockets fitted for UCH & CH...

    So today I had 2 new sockets fitted for UCH & CH and they also repaired what they said was some bad track but it still hasnít solved the issue!

    Does exactly the same as before

    Tomorrow Iím...
  18. Iím not sure about the T parameter though as my...

    Iím not sure about the T parameter though as my books only cover the R parameters so Iíd be interred to get a copy of the full parameter list
  19. Hi ToolCat My machine does have the 2 proxy...

    Hi ToolCat

    My machine does have the 2 proxy switches for open/close and chuck over stroke error (if it completely pulls the material out when bar pulling) so it is set to see that signal before...
  20. I’ve spent all day literally, 12 hours fault...

    I’ve spent all day literally, 12 hours fault finding and trying to narrow down the issue and it is 100% to do with the interlocking of the chuck & unchuck relays that’s causing the issue

    The chuck...
  21. Edited as this reply is not relevant anymore

    Edited as this reply is not relevant anymore
  22. Could well be, The left relay is labelled UCH...

    Could well be,

    The left relay is labelled UCH and the right is labelled CH

    I guess that stands for UNCHUCK & CHUCK ???

    So as 1 opens it makes sense for the other to close,
  23. Whilst google searching relay issues I came...

    Whilst google searching relay issues I came across this topic that is not lathe/mazak related but is the exact issue I have so maybe it could be a relay power supply issue

    Here’s a copy and paste...
  24. Ok so hereís a link to my YouTube channel as Iíve...

    Ok so hereís a link to my YouTube channel as Iíve uploaded a short video showing the issue

    I was confident it was a bad relay but Iíve fitted 2 new ones and itís not made a difference but I have...
  25. Update to this again I have found what i...

    Update to this again

    I have found what i beleive to be an intermitent ice cube really for the chuck open so i have ordered a new 1 and will update after a few days use

    Thanks
    Marc
Results 1 to 25 of 31
Page 1 of 2 1 2