Search:

Well, one job I do quite a few of in 316 uses a 3/8"Garr VRX 350sfm 50-60IPM and most of it at .060" step over. It could do more but I know at this setting it'll go all day and then some more with no...

Has it only been counting the Power On minutes for a while and staying on 99999hrs ?

And here I have about 800hrs cutting time on my 10yr old cnc mill and I think the 2.5yr old cnc lathe is...

We're gonna borrow and print our way to prosperity.

PTD cobalt screw machine length (stub) drills.
By center drill you mean a 1/4" spot drill right? otherwise that may be part of the problem if you're using an actual center drill with 60°.
...

Under central command this won't be your problem to worry about. Do what you're told, the science demands it!
2020 was only foreplay, a little warmup for what's to come, and the people will beg for...

I put a LED outdoor floodlight in my turning center and mounted it at the back above the tailstock. It's 120V and sealed up good so I just plug it in the fall outlet, not the machine control. Lights...

I'm extremely lucky to have really awesome friends/neighbors here, but it definitely wasn't always like that before at other places I lived.
I looked a bit for land in the US and investor visas and...

Happy New Year everyone and Welcome to the " Build Back Better " initiative, looks like its official now...

2021 is off to a decent start work wise, I guess we'll all see how long that holds. If...

I added a water resistant 40W LED flood light in the top corner above the tailstock in mine. The LED light it comes with wasn't nearly enough for me and it was way too dark in there.

There's a really good chance Canada Post and Canadian Customs were doing their part to screw that all up good too.
Tracking switches over to Canada post when it gets to the border, or whatever its...

It's speculation. Prices are going up, way up, scrap prices are back up a lot too.

The market speculators expect shortages, between production slowdown and expected very high demand(we'll see..)...

Dirt cheap interests, everyone's buying everything, lumber, RV's, big Trucks, ATV's, Boats, Houses getting bid up way above asking price, etc. Everyone that was waiting to upgrade tractors likely did...

There's still a few things on the cheaper side on the market, but for the most part I'm mostly just piling cash and waiting. Eventually the insolvency crisis will come, it just got kicked down the...

A friend who had a few patients with Covid and low oxygen mentioned a few months ago they lean the patients forward a bit as it helps to better oxygenate the lungs.

Accuracy of the meter is...

Congrats, same one I got, really accurate.
Although I'd have probably put the 2 doosans facing each other just to be able to feed both without walking around.

Those shipping boxes make decent little sheds, gave mine to a buddy and he's getting good use out of it. If you just leave the 2 top side bolts of the end panel it hinges right up.

New lynx with Y and a sub spindle?

Hurco owns Takumi.
What kind of mill do you need? are you hogging with big facemills that need a gear driven 50taper?
For most of us, only 6000rpm would be a problem. A good control that can...

My PT-355 reads about 7.2A on each 1ph leg with no load down from it. Drops to 5 when I turn on the transformer after it.
Just using my TES amp clamp meter.

Any kind of better longer lasting tool you could use for finishing, maybe CBN or diamond ? Also a stronger holder would surely help with flexing.
Pretty sure one of those will cut copper good if...

Right now a lot of companies are loading up their balance sheet thanks to super cheap debt and a lot of it refinanced to be a problem 3-5years from now. Similar to everyone bidding up houses for more...

They suck at both manual and cnc work...

Hopefully the guys trying it will give us some feedback on it in a year or 2.
Every coolant company has the best coolant in the world, but the real world often disagrees.

There's firearm and ammunition manufacturers in many countries outside the USA, they seem to be doing quite fine.
There's been a lot of new "Custom Actions" and high end rifle manufacturers coming...

Voting in leftist tyrants doesn't seem to help.
Please all make sure you go bankrupt in the 2nd lockdown, if you don't we'll do it for you, its for your own good.

...