Search:

Im going to be the asshole.
this is the stupidest thing I have seen. it has to be a joke. or your just an idiot.
you have a block ie 123 block great but your using that same block as a bottle...

https://www.fadalcnc.com/media/pdf/Old_Service_Files/Fanuc%20Info/GE%20Fanuc%2018i%20Operator%20Manual.pdf

here ya go

I wont pretend to know anything about marcos because I dont. but I noticed in your code above for example.
you have a period after 20. but nothing after the 5 or 2 could that be a problem

I had mine stay on for a few days, would get an alarm sometimes while probing sometimes not. one day I probed and it hit z surface and broke.
replaced redid the set up still on. so I took the batts...

Used to do alot of this stuff a long while ago. 500-3000 at a time, most of bolts came from copper state some mc mastercarr. basically all the same bolt stock 18-8.

you said hex head 3/8 at 1st...

It will work just fine, providing you get a quality cutter. 3 flute like niagra alum mills, Garr alumistars. I use them both, I usually crank my rpms down to 6500 max with a ball I generally run...

My daughter got it (at least thats what her docs are saying now) very early last year. she had gotten out of boot camp at parris island went to CA for SOI training started struggling through that...

Just take one of the coolant nozzles and aim it at the spindle case.
I been running for 5 years with out a chiller on mine as theres some leaks I need to fix at 9k and its never been hot not even...

yes if you get the c axis option.
bewarned tooling for live milling is kinda weak, you wont be doing alot of hogging/heavy cuts. but the parts come out just fine. also you will loose some tool count...

open the back and look at the cards, it will tell you everything you need to know.
for rigid tap look at the spindle drive.

you can use microsoft access and modify there northwind sample database to fit your needs. it would work exactly like you need. use it to print out inspection reports as well as pictures and...

its doable if you have a 4th axis, doesnt even need to be full 4th.
I am guessing a ball endmill would be fine and a 270º ie lollypop would work even better. you will have to run a surfacing feature...

I am betting it weights 1000 at the most probably more like 600-800.
The omniturn conversions with a AHC base I can move around by myself with a cheater bar. to move them its really simple. just...

Thanks again for the updates more pictures the better. its great reference material for those who may need it sometime.

Thanks

Well haas is wrong on using the g53 ;) it can be dangerous.


to get the machine to have vises goto the door is stupid simple. I only put the "X" in there cause thats what he had. Only time I even...

Thats some f'k up code

try this
O10005

T1M6
G00 G90 G54 X-32.72 Y0.
S1200 M3
G43 Z4. H1 M8
G0 Z2.

Waste of time and money if its gutted, you could get a fadal cheaper than you can rebuild a acroloc and keep it running. ive had many loved the machines but unless you can get the mechanical parts...

One auger sucks for removing chips on a vf2ss, but I think it would be much better if you put a spray bar on each side of the Back Cabinet. you would have to run a seperate pump as the current pump...

cleaned out some of the shop last weekend

Delrin $35 each bar 10 pcs avail
2-1/4 x 1-3/4 x 18" 10pc Black the stock is oversized by .020-.04

virgin Teflon (we should have certs)
1" dia 6...

Found it its for a ots
Haas OTS calibration 592 variable issue

matt was the guy I was trying to remember
...

theres a pain in the ass way and a easy way.

easy way it to move it then find the Variables that sets the x y coordinates of the position of the tool setter. change that number and 9 times out of...

3 duces are a cake walk to tune on a Chevy, most of the tuning issues were sloppy linkage way back then.

try 6 duces on a small block. I still have my 6 duce strognberg set up and my cross ram...

What type of quality issues? dimensional, burrs, finish etc etc? do you do in process inspection and 1st articles?
My Customers inspectors will tell me if they have an issue with a part/parts. I...

Heres something else to think about.
Dont knwo what type of machines your running or how new,you may want to look into your drawbars.
older machines get alot of gunk and grim over time in the...

I been using solid carbide internal tool company for years they have a small angle/flare on them as well. Mc mastercarr sells there stuff also.

I had some 321 stainless that need a rad edge with a...