Search:

The collets aren’t easy to get these days and it’s an old standard but I had a b60 collet chuck on the main and a b43 on the sub. I have most sizes of b60 collets and then s pad style collets in s10...

I did not know such a saw existed. I need one now. Everything else I’ve been looking at looks like junk in comparison.

I gotta lead on a powermatic with hydraulic feed etc. but coolant troughs and...

Sure seems that way as it’s not on in the picture once the machine arrived.

I like that one a lot better that the chart on my pacemaker. Atleast it’s somewhat cover with handles etc. the...

For very little (4%) more than that I got a quote with sub spindle. Doosan definitely came in as the most cost effective machine. With some of the best options

I was just worried about some things...

I was looking at the Mazak are’s aswell but it was priced higher than the qtu series at the time. Takisawa was also more than a qtu.

Toe jack it up and set it in blocks so you can get your forks under it.

Or if you don’t got a toe jack just get the tips of the forks under and tip it up a bit and get some wood blocks in. Till...

Is there a parameter that will keep the spindle on?

I thought the feed hold would actually cut the spindle off aswell. I’m pretty sure it did on my sqt with a tplus

Edit:
I may be wrong my...

Ah I missed that part. I’m not sure if it will stop the spindle.

Optional stop. But you have to remember to turn that on the control every time you start the machine. Or you could just do an m0

I’m assuming you want to do this in mazatrol just do an mcode block...

Yea it seems to be pretty typical. I’ve gotten quotes for riggers before but I’ve always just been able rent a lift for about half that. Since most of what I’ve moved is easily rigged with a fork...

That’s pretty cheap I just hired riggers for the first time today and it was $1500 to pick a machine and conveyer up to load on a truck. So I think you got away cheap.

It’s a vertical turning center now.

Been a while Eric how have things been going? After you sold me that vise I got hooked on them I think I got about 7-8 of them now.

Do you still have that...

I have one at home but I’m n out sure on the model. Have powders to go with it aswell no hoses or regulators though.

Well it was not an extended z axis so it fit fine. Also put a vmc5020 in I had to remove the thrust bearing block for the z axis.

Man that was a while ago. Yes I purchased that machine and a bit ago I sold it. Was a great machine for me I just moved to a larger travel machine.

I know a guy over there he just took over a department of theirs I can share his contact info with you. He is a good guy and surely can help you out.

His name is Tony

Let him know Ian sent you

McMaster sells cups and strips

VCI (Volatile Corrosion Inhibitor) Vapor Emitters

McMaster-Carr

VCI (Volatile Corrosion Inhibitor) Vapor Emitters

McMaster-Carr

Well I’d say store it in a shipping container. A 20 footer is typically about $1400 delivered. Make sure you get all the parameters saved include diagnostic parameters and other stuff. And make sure...

I think so I’ve been looking fork a mark Iv integrex and most of them still have the km63

Iscar also makes Im 63 that is compatible I think

I heard about some issues with the spindle cracking from the capto spindles in mazaks.

I use mighty bite talons and they work as advertised untill I cut them accidentally.

I thought about buying a few sets of these jaws and I will make sure to avoid them. Even if they had an issue...

Things are still moving along albeit slowly.

I got the way with good contact most of the way across now I just need to refine the bearing a bit and then one side will be done.
...

Might be easier to just take the sheet metal enclosure apart. Plus you get the opportunity to reseal it as you get it back together.

I would try to avoid removing the electric cabinets if I could....

Lol that’s because he was just telling you the truth. I’m Amazed the doosan came out to much more than the haas. Couple years ago a new doosan dnm5700 with all the options you won’t get on the haas...

That was a good deal if you have another I’d be interested.