Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: Rdeere

Search: Search took 0.00 seconds.

  1. 16/3.75=4.27. 1785/4.27=418rpm. I believe that...

    16/3.75=4.27. 1785/4.27=418rpm. I believe that will be close enough. Thanks for your help and info.
  2. I ended up with a 3.75 pulley. That’s as close to...

    I ended up with a 3.75 pulley. That’s as close to original spindle speed I can get. Speed chart shows 358 rpm in high gear.
  3. A friend of mine has a 20 lodge and Shipley. Same...

    A friend of mine has a 20 lodge and Shipley. Same size clutch pulley and motor speed. It has a 8” motor pulley. Was thinking that’s what my work would be 2 to 1 ratio so 16/8=2 and 1750/2=875
  4. My clutch pulley is 16”. It’s 1 to 1 with chuck.

    My clutch pulley is 16”. It’s 1 to 1 with chuck.
  5. Ok John will do. I’ve found a motor. Going with...

    Ok John will do. I’ve found a motor. Going with 254 7.5 hp 1755 rpm. Should work good
  6. 1945 Leblond Regal 21” x 102” lathe motor and pulley help

    I bought a nice old leblond regal 21”x102”. The motor and motor pulley is missing. I contacted leblond ltd and got build info. It had a 220v AC 3ph 5hp motor when shipped. They didn’t have a frame...
Results 1 to 6 of 6