Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: mkvidaurre

Search: Search took 0.00 seconds.

  1. You learn something everyday! Our company...

    You learn something everyday!

    Our company really only uses the plasma machine a handful or times a year, so I'm guessing we went with the high pressure bottles for their stability. We normally...
  2. No, compressed oxygen bottle. We regulate it from...

    No, compressed oxygen bottle. We regulate it from the bottle pressure (initially 2000 psi or so) down to 135-140 psi, and then the gas control console to the final pressure & flow for the head size...
  3. It should be pretty dry. The reason we got this...

    It should be pretty dry. The reason we got this new compressor was because our old compressor had some oil going through the line--good for your air saw, bad for your painters!

    We have the...
  4. Our shop air is at 100 psi, and the machine...

    Our shop air is at 100 psi, and the machine requires 120 psi. The accumulator tank (which is downstream, like you suggested) is about 5 gallons. The compressor we have is pretty rippin' and...
  5. We have a large air compressor that feeds our...

    We have a large air compressor that feeds our entire fabrication area. There's air dryer near the compressor, and also an accumulator and booster pump on the 1" branch that directly feeds our...
  6. It's a Thermal Dynamics Ultra Cut 200. The torch...

    It's a Thermal Dynamics Ultra Cut 200. The torch itself is an XT-300.
  7. Major Failure on Torch Head - Torchmate Ultracut 200 cutting 1.5" Mild Steel

    This morning, I was trying to get a piece of 1.5" mild steel dialed in by cutting thin, 1/2" strips. Our machine can cut 1.5" material with a 150A head on an edge start. I finally found a setting...
Results 1 to 7 of 7