Search:

If Neilho passes, I'll take it.

Yes, each use their own, but there's always a bunch of Logan parts on E-bay

Thank you everyone. I've been using .125 nylon rod for several years. Just getting to be a pain now that the amount is going up. They won't allow anything but a pellet.

Wahlstrom still available?

That's kinda what I'm doing now. Material is cheap enough, just looking for a quicker way.

Yes, these are the ones, but they are pre-applied. My count is way to low for that, but appreciate the help.

Looking for those little plastic (pellets?) that go in a drilled hole on the side of a threaded shaft, bolt, whatever.

They're available here in the US. I've got both and they work great.

I do piles of metal cutting blades (44Rc) already toothed. From 50cm to 124cm. Hate those big heavy rascals. Usually opening up bores and putting in lug pin holes. I've made up arbors to fit the hole...

Yep, got a bunch of sleeves hanging on the wall. Some are brass, but mostly aluminum. Both metric and inch. Not sacrificial. Just reheat and slide 'em off.

MOOB. Clever!

rimcanyon,
You're over thinking this. All you need is perpendicularity and square to bed ways. Center could be ¼" off both ways or more and still work fine.

Is this the one? Quite an air pistol!
The Skanaker: a Crosman pistol you may never have seen! | Air gun blog - Pyramyd Air Report

That's only with the extra number column on the right, I think.
more examples
0188...¼
0189...½
0190...¾

Here's a little history from John Knox. He was the G.M. and had a hand in the design the "R' model lathes. He told me the Monarch Jr. (1933 to 45) was bought by Sebastian Machine of Cincinnati. Of...

It's called "mooning".

search english wheel dies.

There's a heap of companies out there that sell all sorts of EW dies.....cheap

It was impossible to breach. As soon as I entered, I removed the trigger that was hidden in plain sight.

Years ago I had a Minuteman security system. It was NOISE activated. Not motion sensored. This was strictly something that would make you go deaf in 10 seconds or leave the premises. This was plugged...

Or Ettco or Jarvis.

What did you just say??

That's the damndest steady I've ever seen. Sheet steel?

bump!.....

Unbelievable technology. Just rotate the earth, find a green dot and listen in.
I tested this with Stuart (atomarc) and he approved. It even works in Kansas.

Radio Garden – Explore live radio...