Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: tnmgcarbide

Search: Search took 0.01 seconds.

  1. machine is up and making parts tonight (!!!!!!!!)...

    machine is up and making parts tonight (!!!!!!!!) yesssssss.

    again, thanks to all who participated and were concerned with my dilemma.
  2. hit or miss- the valve doesn't actuate when...

    hit or miss- the valve doesn't actuate when hooked to the wall 120v ac .

    new one should be here soon . the bladder valve is also here, but haas chose to epoxy
    the stem from the mac valve ....
  3. the pressure gauge? the haas manual advised me...

    the pressure gauge? the haas manual advised me to install it:
    ...
  4. thanks for the tip.... bizarre source for...

    thanks for the tip.... bizarre source for pneumatic parts . what's even more bizarre is that my wife already
    had an account with them for our clothing store (they supply our printed bags)
  5. Finally made it to the shop tonight I hit the...

    Finally made it to the shop tonight

    I hit the trp with 85 psi ,and it spit the collet Chuck out like a champagne cork.
    It made a huge boom in the bucket I caught it in. I nearly pissed my pants.
  6. following haas bulletin: ...

    following haas bulletin:

    https://www.haascnc.com/service/troubleshooting-and-how-to/how-to/vmc---30-40-taper---tool-release-piston---pre-charge---adjustmen.pdf

    anyway, solenoid is not engaging...
  7. tool may not be stuck. piston only pushes the...

    tool may not be stuck. piston only pushes the drawbar .010 or so. i don't think that's enough.

    looking at the video on a large monitor, it's obvious that the stroke should be about 1/4" or more ....
  8. 1999 vf-3 geared head. non-tsc .

    1999 vf-3 geared head. non-tsc .
  9. here's a video : Browser not supported -...

    here's a video :

    Browser not supported - Google+

    doesn't seem to be extending enough . the trip ring barely moves past the upper
    limit switch.
  10. help! my tool release piston trp won't release the tool .

    trp is not releasing . it barely taps the pullstud release rod and that's it.
    i dialed the trp regulator , and am getting the haas recommended 30 psi at
    the solenoid . perhaps the tool is just...
Results 1 to 10 of 10