Search:

Talyrond roundness checking machines had some kind of centering and tilt adjustment on the chuck. I haven't touched one in 20 years...

I've done this many times also with regular rod and a wire machine. The heat seems to do wonders. So many broken bolts, that an impact couldn't get out, spin out with one finger on a hand wrench. ...

I have 240v 3 phase. It is a delta transformer configuration with a center tap between two of the legs to provide 120v single phase.

There's a bunch of information and videos on fusion 360 post editing if you google it. Your need is actually a good place to start. Basically, everywhere the post inserts an M03, add the code to...

Add it to the post.

The shank is about 1.150"

Yes, I was considering an OD bore and threadmilling it. Still have to securely hold the hook end and get it aligned.

How do I fix the thread title so it says chain instead of chank? Ugh...:angry:

Does anybody have a decent way to hold these? The last time I did one, I had a sketchy setup in a four jaw. The only regular surface on the whole thing is the part I need to machine.
Thanks,
Tony...

Saw Maiden 2 weeks ago at Tinley Park. Best Maiden so far, for me. All the good stuff. No new songs.

Are you getting the chips evacuated and out of the way? Cutting dry with air blast is preferred. I would straight slot it with the 3/8 end mill. Depth of cut will be limited, as the slot depth is...

Talk to a local custom kitchen cabinet shop.

Ask these guys. They repair a lot of Haas electronics.
Zaritron

As soon as I took the salesman off script, he was lost. I kept getting the gun out of the cameras' view, which was frustrating. I didn't see anything obvious that would make it easier to use than...

Lathe, PDF Page 80:
http://victoriacaruk.com/Mazak%20General%20Information%20Manual%20-%20CGENGA0015E.pdf
Mill:
Leveling - VMC

If you are having trouble with 4 adjusters, just wait until you get a big boy machine with 6 or more! 😀

I would also be interested in thread plug gages!
I prefer to patch tires, but will plug them in a pinch...

I'd be interested in the tread plug gages.

The 40% rule isn't a limit on a customer, it means you have to do the work to grow the business with other customers.

Freeze plug. That's genius right there!

I agree with JST. I think this will give you the most bang for the buck.

I really like these, but I cant find any to fit my giant gourd!

You really need current probes to get a good sense of what is going on.

A power analyzer has 4 voltage connection probes and 3 current sensors. It will have some scope like functionality. I wouldn't bother with a standard scope. Define what you want to know before you...

Rent what you need:
Rent Test Equipment | Buy Test Equipment | ATEC Rentals
Test Equipment Rental, Test Equipment Lease - TestEquity
Which standards are you going to test to, and what are you...