Search:

You might check to see how hard the retainers that you want to modify are. Might be to hard for HHS tooling.

Trump= Jim Jones Please drink the Kool Aid ! Ask any of the sub contractors on any of Trump's projects how they were paid!

ID plate is usually on side of block ,as fuzzy memory serves about 3"X4" . Don't recall the shop where I worked at resurfacing the blocks as a regular thing,heads as needed. Did you put a vacuum...

Well I sold parts for these in the 60-70s and there are 3 different style valve retainers/keeper ! The cross pin and then 2 different styles depending if the valves are positive rotate style or what...

Either your floor has a hell of a slope to it or something is a WAY out of balance to do that with rubber feet.

Well I maybe Joe Lucas reincarnated as the well over 50 Lucas equipped bikes I had in the 70s-80s gave me VERY little trouble in the electrics. Bikes ranged from BSA C-11 to Vincent BS and Ariel SQ...

F series engines are about 25% bigger so fitting one in that equipment should be interesting !! Most Y series were used in forklifts,so try forklift salvage yards. 60s-70s I worked at a distributor...

The only correct way here is to measure the bore the bushing fits ! If you can't buy the correct bushing to fit and need to make one ,make the OD .001-.002 larger. And most likely the ID will need to...

Any bets the "driver" was a recant immigrant from take your choice. 10-15 years ago when i was driving OS load pilot cars ran into some real winner drivers .{Herders would be a better description...

Need to find myself a Little Red Wagon so on a busy day I can hitch the dog to it for a postal run:D[/QUOTE]

Would that be a Spotted Dog ?

BUMP one time

Value depends as always on condition and tooling included. Looked at the "Lathes" site and would say 90% of the home shop types [except me] would find it to big etc. $1500-$5000 depending as above in...

SOLD !! This came in some odd tooling bits I picked up recently ,not having any 40 taper stuff no need for it. New $150 so $50 plus shipping. Paypal please.

A friend of mine recently PU a 16" SB missing the bed clamp for the taper attachment. Anybody have one ? I would probably make one if it did not fit on a V way,that adds complication ! I have made...

Iron scrap ! LOL Looks like a micrometer stage for ???? compactor- grinding - WEDM -???

You can buy rectangler key stock .But I just would make one to fit out of 1018 .fitted to size so no slack CRS steel would be fine.

Boring head in the mill with a left hand boring bar,carbide if needed.

Call Clausing with your model/serial number and they will send a PDF manual for that serial FREE!!

Off to eBay ! LOL
Thanks for looking.

Dog driver for between centers work would be my thought.

$119 is as reasonable as you get . I sent you a email with the link.
Logan 10”? Lathe Tailstock Assembly | eBay
But here it is again

Received payment will ship on Wednesday. PS your PM box is full !

PM coming your way

One bump then Ebay I guess.
Thanks for looking,
John

OP What diameter is the material? Less than 20MM try using a center in the tail stock. Good rule to go by ,any more than 4 times diameter use a center. Does your insert have a chip breaker? If not...