Search:

Greer machinery in LA is the guy to talk to, that's all they sell and they're good guys

remember that carbon fiber is electrically conductive. Get the dust in electronic places and you're gonna be hating life!

we bought our saw from World Saw in LA and were treated very good by them. They also come get our dull blades, re-sharpen them and bring them back! And their sharpening service is very economical. I...

Try calling Joey at Specialized Equipment at 909 591 0851. I think that's the right number. They run trucks nation wide and do rigging. He's a good guy and he can help you.

Does it have drum brakes or internal pate brakes? Drum brakes should be easy to fix, the internal kind, not so easy, or cheap. Internal brakes are like a clutch in an automatic transmission, steel...

I've used Peps and Opticam. Not impressed.Changed to ficus by Metalcam and love it! It's amazingly fast and easy. Call Kieth at 770 560 7996. No affiliation, but his support is superb!

Not to mention using a quality tap, in good shape ( like new)

I don't think you can do better than Newall. The ease of installation is amazing! We've had our oldest one going on 10 yrs. not one problem.

we have a 2018 VF4 and haven't had any trouble with it at all. When our guy came to do maintenance on it, he said it ball barred perfectly and needed no adjustments. I like it. Maybe a little harder...

If it's like any other Haas, press MDI enter the tool number (Txx) and press ATC FWD or ATC BK. There should be a tool release button on the column, and there's one on the control

I did search and didn't find anything, so I'd like to find this manual I can download.
I know it's a 2 m something, can't remember, and the machine is a ways away from me now.

Man, I'd run from that! You should be able to find a turret lathe with real bearing spindle for that price! Like John said, when the spindle gets worn out, you're done! And it's been ran for 70...

As I understand it, most of those lathes were copies of a Mori lathe. Yours doesn't have the gear change setup that my Hwcheon does, or even cloe. You could call Webb machinery in Temecula C for more...

If you're anywhere near Southern California, Pacific Circuit Breaker in South El Monte is great place to buy breakers and panels at a substantial cost savings!

I've got at least one 50 to 300 with maybe 20 holders I'd take $500.00 for all of it. There's some collets in there too

might talk to Keyence. They have some amazing measuring equipment, pricey tho.....

Specialized Equipment in Pomona Ca. All they do is move machinery and they do it well! Ask for Joey

If you're looking to do a bunch of 3d stuff, I'd seriously consider a Haas VF3. A much better machine than a Fadal, unless you're set on one just to practice for your home machine

Did you try cranking the tailstockquill all the way in? Sometimes you'll hafta crank it in hard to remove a well seated center.

Some pretty good stuff on youtube from this old tony about building a steel router

be sure you understand that you have to replace the vfd. I've never seen a dual voltage vfd.

how about something like this? The sad thing is I'm out of room, already!295466

Automationdirect! Good products, easy setup, great support, and an all around good company.

get someone out there with a ball bar setup. They can tell you all kinds of things by reading the results using a ball bar. Maybe first check the thrust bearings on the ball screw.

I'm sure Keyence will bring one out to you and demo it. They've brought their wireless scanner thingy here, even knowing I wasn't a buyer. On a side note, I've never bought anything from them that...