Search:

I think that he (Joe Lynn Turner) is a good singer.

He did an album (Slaves and Masters) for Purple in 1990.
Boy - were the old skewl Purple fans PISSED!
They threw a pitchin' fit at a concert...

Well, not quite that dramatic - other than the loss of material and a fast approaching deadline.

It's only 1/4", and it wasn't fast really, just a steady push from the feeder.

Actually didn't...

Well, that was "precision Ground" 01 stock.

My parts are only an inch long, so I was actually able to straighten it out to some degree and am currently making lemonade.
I will likely lose a bit,...

Pics big enough to see would be a good start.


------------

Think Snow Eh!
Ox

Shipped the 20th

Attempted to deliver at noon on the 21st.


That's how I read it after a few goes at it.


-------------

Second verse, same as the first?


---------------

Think Snow Eh!
Ox

https://digital.fabricatingandmetalworking.com/publication/?i=691030&ver=html5&p=20



-----------------

Think Snow Eh!
Ox

I think they still make cardboardmeters?


------------------

Think Snow Eh!
Ox

I guess the punchline is:

Were the Chincs puting it on our shores and then going to market it themselves, or were they simply fulfilling a contract per their customers request?

...

I'm much more likely to fetch a '75 F250 High Boy, drop a 460 in it, and 38.5's under it.

Or, if I was a body man, I would go for a post war Power Wagon and set it on a GenII Cummins chassis....

Well, after all that, it appears that they are NOT going to swap out...

Bolt hole patterns all the same.
Stub Axle broach the same....
Pilot D going into the axle the same.

But when you go to...

I can see how C/L brakes would have less stress on the assembly as a whole past the ball joints, but I am not following how that transfers to "Performin' Ants"?

And as for the operator - that...

Well no Schidt?
Lookie there!

:D


--------------------

Think Snow Eh!
Ox

You sure that you're not looking at the paperwork for the shocks on your Baja runner?


-------------

Think Snow Eh!
Ox

However, even if you can grease the bearings, the life will likely be limited to how much water intrusion you git from a worn out seal.



Maybe I should'a used the other grease gun that had...

What is the speed rating for the class 8 bearing?
This will be spinning 1/2 - 2/3 again faster eh?


My job didn't turn out real purty.
The hole was already slightly larger than the 1/8 pipe,...

I really don't see the concern here?

That Street El is likely rated for 3500# hydro?
Shirley that's good enough for coolant?

It looks like it was done well, and easily serviced if I want to...

That's a problem?


-----------------

Think Snow Eh!
Ox

SFM / OD of tool x 3.8 = RPM (Taken from 30 yr old Titex catalog, but I think it still applies)

or in this case - werking bass akwards:

RPM / 3.8 x D = SFM



------------------

Boy - it seems that the belt could sure get with the program a bit more eh?


-----------------

Think Snow Eh!
Ox

If you have live tooling, just toss a slitting saw in place of the cut-off tool and drive on.

It is a game changer!


------------------

Think Snow Eh!
Ox

No - it was here in NW Ohio.
I found it:

Philips to close TV tube plant | The Blade


-------------------

Think Snow Eh!
Ox

FWIW - The US never tooled up for flat screens.

I had no clue until they were almost done, but there was a major TV facility not that far from here, and a fella that I know made oodles of parts...

180 sfm on that drill?


-------

Think Snow Eh!
Ox

I haven't actually followed the Brother ads all that much as I am not in that market _ today anyhow.
But I noticed a Speedio ad in one of the trades in the last cpl of days that was advertising a 40...