Search:

I think it could be a good opportunity, and you may really not have a choice, if not you, who? If someone else, you may be the one to go.

As mentioned, it will be good experience no matter what,...

The Heidenhain control [TNC131?]I believe is in this is a non interpolating control, I don't know how useful it is. I have not seen any parameter lists around. Did any documentation come with it?

And 55 degree thread.....of course all of our first questions should be 'why' rather than just rushing for the solution

revived by a spammer, but anyway, Pluto is a pretty good source of free content. Especially if you need to watch MST3K 24 hours a day

No it is just a case of right wing bobbleheads making crap up

They are doing no such thing

Like the commie bastard Obama opened up the borders, sent more people back than traitortrump

stupidity like your comment is why actual reasonable policy does not...

yup old enough to remember when the power went out the phones still worked, those old ringers needed a bit o voltage to ring.

I do love my EE, but the action on the CK is so fast, and the brute horsepower, take an inch off the diameter then finish to half a thou, it is an incredible machine in its own right

SO I tried it, easy enough

still prints out pitney bowes

I was unaware Delta made this style saw this late. The split arm is so much more useful than the usual pivot from the post style

315517

cousins!

CK is the tool room, which has a few detail differences, I think lead screw reverse and maybe the quick clamp tailstock

My 12ck only goes to 550, although I think I have a bigger pulley than stock, never measured speed

THe CK is a really nice machine and it might be able to spin that, but it is not made for fast,...

You sir, are not right in the head


My favorite kind of people

nope

you must be old

In the analog servo amps I am familiar with, you have +- 10 volts from the control and a tach that puts out the opposite, -+ 10 volts. They are literally connected in so that the servo amp tries to...

I am thinking of those pics of the tool that got spun up and went through the machine door and the block wall.

No blood no foul.....

Hmmmm interesting

Unless my overpaying for shipping is keeping USPS afloat

Who was the comedian who was trying to figure out how to support the PO, like buying stamps and throwing them out, no,...

Is there not a sheet metal cover that can get caught in the span you mention

THe right question is compared to what

Perfectly square, perfectly fed, compared to tapping with a hand tap wrench?

Not really sure if this is BS or not but it is something along the lines of what I was thinking about


Why old measures of light output don’t always work for LEDs, and what to do about it —...

initial lumens, as we all know fluorescents dim rapidly.

Most energy saving standard fluorescents are just dimmer in proportion to their lesser wattage anyway

I think there are some vagaries...

I think the answer to the question is higher rated rectifiers will be fine. When you are building 10000 of something the difference in price matters, when you are doing one, not so much. There are...

Belt is probably worn, but there are also be out of adjustment or damage to the mechanism.
The way these things work is the handle you are turning is winding a short piece of chain around a spool,...

Mandatory digit count on the way out the door.

Don't worry we keep spares just in case

You have not addressed your lie
Texas cannot unilaterally secede

but go on, talk about a bunch of other crap and pretend you have a point