Search:

Nice work!

I would give it to him free. he just needs the rigger fees and TRansport (or quantum teleporter). (still bored. sorry). We have 2 weeks 3 to 4 weeks tops before the guy needs to be out. (so he...

Here is the spec on the 68882 under $3 and tens of tens of thousands out there. and.. I have a few 20's now that I guess I'll send to the IC bin. I recently pulled out a 286 and finally chucked...

Back to the math at hand.... I'm going to order the 20Mhz 68882 (done. 4 for $40). and try it. I have the appropriate support files and we'll just see where it all goes. Told 8.x was DB brush....

I have tried this a few ways in the Haas forum and I know I am not asking right.. But will try here as well.

90's era Haas in our home shop possession. CPU board has a CoProcessor socket. This...

3/1 price today . 196 a Ton. about same as last months. (told it changes on 1st of each month )

I need to post on Craigs list. Guys on Vaca- I did strip out the board set. It's still worth...

But Doc, you did get Marty ................Back to the Future! :cheers: All good!

Really quick

I think it would be a Motorola 68882 in the jlead(?) (pop in type!)
But in a 16, 20, 25, and 33Mhz version?

Going to play soon!

PS- Anyone have the CoProcessor PROM BIN...

A wee update! I will be honest, IF I were to cut it up, load it up, I'd put it on my trailer and run a few miles in a few trips to our large metal recycle place (where they would take it if cut up...

Hey hey folks,
I've tried a few people locally. (steel people). I just thought I'd ask here. Trying to buy a down and out 98 unit VF(VF5) in mech pieces mostly. I can strip and spare-out, but...

Duuuuuuude TY. I HATE looking up Molex numbers! TY! in my little DB.
:bowdown:

[/B]
... To add to this- WE just ran some test moves on 5 Simul for a small part proposal. It does work. Zoom shows the correct movements. Then we ran the code too. So it seems to work 'ok' ...

Here is a post I did some time ago for the 98 RENCO encoder replacements. Maybe this can help find a new OEM solution.

...

Since this is alive again- tryhard, Pretty sure it's a solid NO. (love to know I'm wrong). The VFD drive is then linked and connected to the MOCON board on ours. if anyone knows of a VFD which...

Thanks! Good to know! There are some docs and info around about matching.. We'll see. It's running I just wish we had more data... (engineer's... never happy with limited data).
GC :cool:

Hi Mario, Can I ask for a short update/re-assessment.
Is English a native language or are you running this thru a translator? Why: Haas English manuals have some decent Engineering and Systems...

I tried a post like this before... Been slow so I will try this again and ask among our 'Elder's of Haas' Short as I can...

OS 9 to 10 differences
Q: Is there any benefit of a 9.64N (final 9)...

I'll toss in something from left field. Upon a time our 98 would power up, and then the Y would just start moving. I never paid attention to the encoder or screen values much as we diagnosed it...

Off today and wandering the threads. sucked in too but only as 'interested w/ no clue'. But fun topic here.

I went looking for point to point over high voltage rather than ethernet as a term....

Welcome to the forum! A lot to unpack here IMO. I'm an Adjunct and been an instructor for 30+ besides the day job. Definitely many ways to put some lipstick and rouge on this thing. IT means...

I need to do the same... Print and read and think. Keep us posted!

Found it.. Here is the post.
DWO Macro for 4th axis

Some good info in here...

K... ping us on a PM if you want to zoom or chat about setting up Center of Rotation in all the CAM stuff. It's not that bad. There is a post here in this forum w/ a few videos from a guy who wrote...

Definitely probably best to make that call... maybe consider: Go 'man in the middle' with Wireshark or Fiddler Everywhere on a PC and monitor the ethernet traffic? It might actually be there? Just...

Morning, sounds like a fun project!
We found that mostly true on the hardware side. We just ran up the cables, went into setup.. bing bang- spinning. We did need to get the firmware updated to...