Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: nordlichtFanuc

Search: Search took 0.00 seconds.

  1. I would suggest crimping. Machine a recess into...

    I would suggest crimping.
    Machine a recess into the plug..
    Make e crimping tool which crimps the tube into the recess.

    No additional material needed, no flux, no cleaning, no discoloration..
    ...
  2. Replies
    0
    Views
    175

    MV Junior Z Axis Humming

    Hi guys!

    The Z-Axis on my MV Junior has started to make a humming noise, when it is near zero return or at zero return.

    The noise starts suddenly and sometimes disappears from itself.

    I made...
  3. Thanks alot for the good feedback. As edited...

    Thanks alot for the good feedback.

    As edited in my first post, you're of course right. I confused tailstock with headstock. Got the wrong translation.

    Great, Im looking forward to using this...
  4. Threading on manual lathe with tap in headstock

    Had a discussion with a friend and Im curious about other opinions:

    He is tapping on his manual lathe with the tap in a drillchuck rigidly mounted in the tailstock.

    For this, he sets the...
  5. Replies
    21
    Views
    1,902

    I absolutely agree with you. We are doing the...

    I absolutely agree with you.
    We are doing the same.. Even our VAR recommends (off record of course 😂) waiting for SP2..
  6. Replies
    3
    Views
    1,653

    No problems..

    No problems..
  7. Replies
    1
    Views
    501

    Can you show fotos of the buzzer? One some werma...

    Can you show fotos of the buzzer?
    One some werma buzzers you can change the internal wiring, to change to pulsating tone..
  8. Used your technique (drop into hole with the...

    Used your technique (drop into hole with the column) with great success.

    I read thaty ou have connected your machine to your PC.

    How did you set it up? Are you drip feeding it or sending the...
  9. Hi! I also thought this is quite reasonable. ...

    Hi!

    I also thought this is quite reasonable.

    BTW: A question on how to best use the machine, when milling:

    As the Z-Axis is not controlled automatically by the controller, how do write...
  10. Ok, thanks for the info. Did you use a testbar...

    Ok, thanks for the info.

    Did you use a testbar to check the true TIR?

    I think I dont trust myself to dismantle the spindle, just yet..

    How much TIR do you have, when a tool is inserted, on...
  11. Just want to let you guys know, what I found out:...

    Just want to let you guys know, what I found out:

    These (old) types of X/Y Axis drives and also the Spindle drive produce residual currents, flowing back to the source through the PE conductor. ...
  12. Hi! I stand corrected! You are very right,...

    Hi!

    I stand corrected!

    You are very right, as the RCD tripps probably not because of the spindle drive, but has something todo with the x/y servo drives.
    I checked again the sequence, and the...
  13. It think it triggers several seconds after the...

    It think it triggers several seconds after the drive is energized.

    When I power up the machine with the main switch it does the following:

    -"Speichertest" (Memory Test) This takes some 10...
  14. Wow, these are fantastic infos! Thanks alot! ...

    Wow, these are fantastic infos! Thanks alot!


    I had the machine running yesterday evening!
    The Spindle head is moving up and down, as you described, thanks alot! I had not yet figured that out...
  15. Hi jz79 Nice to see your thread! You wont...

    Hi jz79

    Nice to see your thread!

    You wont believe it, but I just bought what seems to be the exact same machine as you have.
    Bought it also in Switzerland at an auction:

    267744
Results 1 to 15 of 17