Search Results - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Close
Login to Your Account

Search:

Type: Posts; User: tbirds

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    6
    Views
    477

    [QUOTE=L Vanice;3657075]I bought a very nice...

    [QUOTE=L Vanice;3657075]I bought a very nice digital laser tachometer on eBay for around $10. It works fine and is, of course, made in China. You need to add a 9V battery and a small scissors to...
  2. Here's a couple of pics. that should help you;...

    Here's a couple of pics. that should help you; the side shields are attached to the center piece.
    Cheers
  3. Rons, Done a search on this site, and found the...

    Rons,
    Done a search on this site, and found the statement below by MILFLYER around 2006, but the list that you refer to, was almost all US produced lathes. I also believe that MILFLYER may have a...
  4. I wanted mine against the wall for max. floor...

    I wanted mine against the wall for max. floor space,so I installed 4 swiveling casters, but found out it "rocked" during some operations; so I installed "steady rods", and a step as the lathe was...
  5. List of S/N's and year of manuf. for HLV, HLV-H, and possibly TFB-H

    This is a list of Hardinge lathes by serial numbers and year of manufacturing. I have only included HLV-H and HLVs. It is difficult to know when a production year ended and a new one started, the...
  6. Replies
    5
    Views
    409

    Thank you all for the great info. I went to E-bay...

    Thank you all for the great info. I went to E-bay yesterday, and easily found a bearing with the right p/n and manufacturer ( identical to the original) for 32$usd or 44$cdn including freight; at...
  7. Replies
    5
    Views
    409

    Hardinge collet closer

    Hi,
    I'm in need of the bearing inside the handle; it's p/n: CLC0008233 at 470$usd; by the time I get it in Canada with the exchange, shipping, duties, the price is out of my budget for something I...
  8. black cam

    That long cam shaft on mine, is the HI-LO speed lever; it has 6 cams, assuming they are for the 600V. 3 phase motor: 3 contacts for LO, and 3 for HI selection. In LO, it'll go from 125 to 1000rpm,...
  9. Taper Attach.

    I have a Hardinge taper attach., brand new, still in the box that came with the lathe. I'm just a hobbyist and will not use it. I don't know if it can be "rigged up" to a 14" lathe though.
    If...
  10. Replies
    19
    Views
    2,996

    Interesting! It looks like as you say, something...

    Interesting! It looks like as you say, something is preventing free movement of the threading lever in one direction; mine makes contact both ways on that speed lever.
    This leaves a couple of...
  11. Replies
    19
    Views
    2,996

    That by itself makes no difference; when the...

    That by itself makes no difference; when the "feed-thread" knob is selected to feed, you can move the threading lever either way; nothing will happen even with the spindle turning. When "thread" is...
  12. Replies
    19
    Views
    2,996

    Remove the lower access panel on the head stock,...

    Remove the lower access panel on the head stock, as seen on the picture; you will see the shifter; it looks like a letter "C", and there is a set screw at 6 o'clock, and another at approx. 8 o'clock....
  13. Replies
    19
    Views
    2,996

    Mine would stop at random while threading; turned...

    Mine would stop at random while threading; turned out to be a broken "shift lever" or "fork shifter", located inside the head stock's gearbox, as seen on the pictures;it's been removed on this...
  14. Replies
    0
    Views
    652

    hlv-h new taper attach. for sale

    Brand new, still in the original box taper attachment for sale; asking 1000$ usd plus shipping from Montreal Canada.
    Note: the brown spots, is the original packing grease...cheers.
  15. Thread: HLVH Gearing

    by tbirds
    Replies
    8
    Views
    1,545

    HLVH Gearing

    Just a quick note here: WD40 is useless as a lubricant contrary to popular belief; WD stands for water dispersant, and 40 means it took 40 recipies before they got it right.
    Cheers.
  16. Thread: Hardinge HLV-H

    by tbirds
    Replies
    24
    Views
    4,116

    FWIW, mine came in with a 600V. 3 phase motor,...

    FWIW, mine came in with a 600V. 3 phase motor, which is the original.Not wanting to touch anything in the control panel, I bought a phase converter and a 600v, 3 phase transformer; I got help from an...
  17. Looking at Larry's picture (1960) and mine(1975),...

    Looking at Larry's picture (1960) and mine(1975), the jack screws are at the exact same locations and the same thread size. Looking at the operator's manual, it shows the taper attach. and you can...
  18. Hello John, 2 reasons: first, if you look...

    Hello John,
    2 reasons: first, if you look closely at the flange inside the sump, where the pump sits, you'll see the flange is eccentric, and there's not much room opposite the jack screw for a...
  19. Had a bit of time on my hands today, so I drilled...

    Had a bit of time on my hands today, so I drilled and tapped a 1/4-20 hole directly opposite the original jack screw, to assist in pulling up the pump assy, being tight in there, it would "cock" as...
  20. John, Just for fun, I measured the depth of the...

    John,
    Just for fun, I measured the depth of the oil well: the apron thickness in the vicinity of the pump is: 2.602" approx., and from the top of the apron to the deepest part of the well (sump) is:...
  21. Larry is correct; here's a picture of the jack...

    Larry is correct; here's a picture of the jack screw. And a picture of the assy. once removed.

    Oops, I see you don't have the jack screw.
    If it helps, the pencil is pointing at the screw and...
  22. Thread: FS: Chucks

    by tbirds
    Replies
    2
    Views
    2,038

    Update again: Both chucks sold.

    Update again:
    Both chucks sold.
  23. Replies
    1
    Views
    1,232

    The above taper attach. is now at $1200 usd;...

    The above taper attach. is now at $1200 usd; buyer pays shipping
  24. Thread: FS: Chucks

    by tbirds
    Replies
    2
    Views
    2,038

    Update on the above chucks: The Bison chuck is...

    Update on the above chucks:
    The Bison chuck is sold.
  25. Replies
    3
    Views
    1,996

    If you would prefer a Sjogren-Hardinge, there's...

    If you would prefer a Sjogren-Hardinge, there's one for sale on page 2 of the Sales section; it has d1-4 camlocs, but the plate can be changed.

    Titled: FS Chucks, by tbirds

    Ooops! it's the 6...
Results 1 to 25 of 93
Page 1 of 4 1 2 3 4