I'm a shop owner and am having a heck of a time finding good sturdy containers for holding parts as they come off the machine. We run Swiss for the most part and parts pile up quickly. I'm looking for suggestions on container Mfr's or anything that you might use that works in the shop. I'm looking for something similar to what's shown in the pictures. Must be strong, fairly impact resistant, and able to nest when empty.
The square one in the picture is about 10"x10"x4" and the other one is 11"x8"x4.5". Roughly about 1.7/1.4 gallons by volume but I could handle a little variance on that.
I got the square ones at auction and they don't have any Mfr info and the other ones were made by Reynolds but have been discontinued.
Any suggestions would be greatly appreciated.
The square one in the picture is about 10"x10"x4" and the other one is 11"x8"x4.5". Roughly about 1.7/1.4 gallons by volume but I could handle a little variance on that.
I got the square ones at auction and they don't have any Mfr info and the other ones were made by Reynolds but have been discontinued.
Any suggestions would be greatly appreciated.