Youngfordkid
Plastic
- Joined
- Oct 21, 2020
Hello all,
I’m in need of the tooth count for the reverse gear on the foreword/Reverse feed lever. Mine was not there when I bought the machine, and I need to make another. The south bend parts book lists two different part numbers for these gears, so I know they are not the same tooth count. The shafts they ride on share the same part number, so the difference isn’t there, so it has to be the tooth count.
It’s a double tumbler machine, Catalog no. CL185L with an 8’ bed.
Any help would be greatly appreciated.
Thanks,
Wyatt
I’m in need of the tooth count for the reverse gear on the foreword/Reverse feed lever. Mine was not there when I bought the machine, and I need to make another. The south bend parts book lists two different part numbers for these gears, so I know they are not the same tooth count. The shafts they ride on share the same part number, so the difference isn’t there, so it has to be the tooth count.
It’s a double tumbler machine, Catalog no. CL185L with an 8’ bed.
Any help would be greatly appreciated.
Thanks,
Wyatt