JamesYanco
Plastic
- Joined
- Nov 26, 2017
I have a southbend 14.5 lathe. Just purchased a 5c 3 jaw chuck.
Lathe has a 5c draw bar, when I attach the 3 jaw chuck it tightens up but there is slop left. Feel like there should be some sort of attachment to go inside the spindle with a taper. As the 5c attached to the 3 jaw chuck is tapered. Thoughts and recommendations please.
Lathe has a 5c draw bar, when I attach the 3 jaw chuck it tightens up but there is slop left. Feel like there should be some sort of attachment to go inside the spindle with a taper. As the 5c attached to the 3 jaw chuck is tapered. Thoughts and recommendations please.