Potmetalwelder
Plastic
- Joined
- Dec 16, 2017
- Location
- Vacaville
Hello everyone.
Recently I've purchased an SB Fourteen lathe... It seems that it was used as a donor machine because it's missing a number of parts.
Anyhow the SB13 uses many of the same parts (same p/n's) and so I'm in search for these to start with:
1. Apron Clutch handle assy
2. 80T Banjo idler gear,bushing and bolt
3. Apron Lead-screw support bracket
4. timing belt - trans to spindle
There are others but these will get the machine running.
Any assistance would be greatly appreciated.
Thanks.
James Ruther
Recently I've purchased an SB Fourteen lathe... It seems that it was used as a donor machine because it's missing a number of parts.
Anyhow the SB13 uses many of the same parts (same p/n's) and so I'm in search for these to start with:
1. Apron Clutch handle assy
2. 80T Banjo idler gear,bushing and bolt
3. Apron Lead-screw support bracket
4. timing belt - trans to spindle
There are others but these will get the machine running.
Any assistance would be greatly appreciated.
Thanks.
James Ruther
