kopcicle
Aluminum
- Joined
- Jan 22, 2010
- Location
- Western Washington
I'll include more, better files as I'm able.
This becomes a long term project with no real point to it other than to upgrade as far as possible.
I need to know what exactly I'm looking for in order to :
Add lead screw
Apron
Change gears
QCGB (I know a bit of a reach but...)
So far I've determined that the model "20" is a stripped 9" "junior" (please correct me if I'm wrong)
I see no mention of a QCGB for the "junior".
I'm aware that power feed and cross require the correct apron (if it exists) and lead screw.
I do have access to extensive machining capability if I for instance I need to modify a lead screw.
I am starting from scratch as far as this particular vintage but have been making chips for five decades.
I'm prepared for a humbling experience because of my lack of period knowledge.
So go ahead and tell me it's a fool's errand and a bit of a bridge too far. I can take it :-)
I have the time and the patience to see this through. In the mean time it's a wonderful, working, example of a machine from an era long past.
~Dennis