bikesandcars
Plastic
- Joined
- Mar 14, 2021
My 10L spindle may have excessive side to side play.
I trued up my Buck adjustable 3 jaw chuck (within .001 - ish).
I noticed I can simply push the chuck back and forth from front to back and give several thousandths of play. The face-bolts on the jaw are tight. The play is magnified at the end of the chuck, but also measurable closer to the spindle. When I do this I can hear a faint clunking sound.
Is this normal or is there an adjustment for it?
Video I just took:
I trued up my Buck adjustable 3 jaw chuck (within .001 - ish).
I noticed I can simply push the chuck back and forth from front to back and give several thousandths of play. The face-bolts on the jaw are tight. The play is magnified at the end of the chuck, but also measurable closer to the spindle. When I do this I can hear a faint clunking sound.
Is this normal or is there an adjustment for it?
Video I just took: