Metalman21
Aluminum
- Joined
- May 9, 2005
- Location
- East Haven, CT
Does anyone know how South Bend assembled the hub onto the tube of the collet draw bar?
Only thing I can see is evidence of solder or plug weld within two holes about .5" in from the end of the tube, (see photo).
Before I put any heat to this I thought I'd ask. I want to make a new tube and use the stock end hub, bearing etc. on the hand wheel end.
Only thing I can see is evidence of solder or plug weld within two holes about .5" in from the end of the tube, (see photo).
Before I put any heat to this I thought I'd ask. I want to make a new tube and use the stock end hub, bearing etc. on the hand wheel end.