South Bend 9C and steady rests.
Close
Login to Your Account
Likes Likes:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2019
    Country
    UNITED STATES
    State/Province
    Florida
    Posts
    15
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default South Bend 9C and steady rests.

    I need a steady rest for my 9C. I found a steady rest on eBay for 60 bucks. This is a very similar stead rest to the one that was supplied with my Grizzly 10x22. There are no specific dimensions in the listing. I asked the seller if the part would work with the South Bend 9C. He told me it would work with a 9 inch lathe.

    Here is the link: Palmgren Steady rest for 9684504 9" lathe 689739731975 | eBay


    Bottom line: It does not work with my lathe. The center of the rest is 3/4 inch off in comparison with the center of the lathe. So, if you need a rest for you Model 9, this is not it.

    Tnx,

    Barry

  2. #2
    Join Date
    May 2019
    Country
    UNITED STATES
    State/Province
    Florida
    Posts
    15
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default

    BTW, I still need to come up with a steady rest for this lathe, if anybody has one they don't need.

  3. #3
    Join Date
    Nov 2005
    Location
    Tennessee
    Posts
    91
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    11

    Default

    I have one that I would sell. PM me if you are still interested.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •