Southbend Taper Pin Part Number Cross Reference

Vladymere gr · Mar 22, 2020

Does any one have a cross reference of Southbend taper pin part numbers to the standard number equivalent?

What is a 168x516 taper pin?
What is a 168x307 taper pin?
What is a 168x513 taper pin?

These taper pins are found on the bent pipe heavy 10 cabinet under drive. I'm sure that I will come across other number as a proceed with the cleaning and re-wicking of my heavy 10.

Vlad

swells · Mar 22, 2020

Vlad,

168x307 = #2 x 7/8"

168x513 = #4 x 1-5/8"

168x516 = #4 x 2.0"

Steve

Vladymere gr · Mar 22, 2020

You da man Steve!

Can I assume that any 168x3XX will be a #2 pin, that any 168x5XX will be a #4 pin?

By deduction then a 168x1XX will be a #0 pin, a 168x2XX will be a #1 pin, 168x4XX will be a #3 pin, 168x6XX will be a #5 pin, etc?

And the last two digits of the part number would be the length in 1/8" over one inch if the number is 168xX1X and the number of 1/8" less than one inch if the number is 168xX0X?

Vlad

SBLatheman · Mar 22, 2020

South Bend Lathe “X” numbers;
Commercially Available Hardware

http://www.wewilliams.net/docs/Commercially Available Hardware Items - Form 1178.pdf

swells · Mar 23, 2020

Yes Vlad, that's correct. They start at 00, 0, 1, 2, 3, 4, 5, 6. = x, 1xx, 2xx, 3xx and so on.

see the link Ted posted.

Steve

Vladymere gr · Mar 24, 2020

Thank you Steve. It looks like the manual Ted posted is from your web site. I thank both of you for the help you have provided, not only me but all of the people on this forum.

Vlad

Search

Largest Manufacturing Technology Community on the Web

Search

Southbend Taper Pin Part Number Cross Reference

Vladymere gr

Hot Rolled

swells

Stainless

Vladymere gr

Hot Rolled

SBLatheman

Titanium

swells

Stainless

Vladymere gr

Hot Rolled

Similar threads