nobrakese28
Cast Iron
- Joined
- Feb 1, 2015
- Location
- Pico Rivera
1) Sjogren-Hardinge Speed Wheel Chuck - No backing plate, installed a 5c collet and it seems to work as it should - $220
2) L-W Chuck Co Dividing Head- Spin nicely, only thing that needs repair is the pin that drops in the plate. Comes with the threaded backing plate to adapt to a chuck. Also comes with a tailstock, but its not original and about 1" short of centerline (just make a plate). $300
3) 12' Troyke Rotary Table - Fully disassembled, hot--tank cleaned and re-oiled. Spins nicely, very low wear inside. Awesome rotary table if you need one. Includes chuck, and can throw in a little plug I made that makes centering it to spindle quick and easy. - $350
2) L-W Chuck Co Dividing Head- Spin nicely, only thing that needs repair is the pin that drops in the plate. Comes with the threaded backing plate to adapt to a chuck. Also comes with a tailstock, but its not original and about 1" short of centerline (just make a plate). $300
3) 12' Troyke Rotary Table - Fully disassembled, hot--tank cleaned and re-oiled. Spins nicely, very low wear inside. Awesome rotary table if you need one. Includes chuck, and can throw in a little plug I made that makes centering it to spindle quick and easy. - $350