What's new
What's new

Bandsaw tires

Cyclotronguy

Stainless
Joined
Sep 21, 2005
Location
Northern California
Need tires for a no name Taiwanese 5-speed band saw. Tires drop into a 15mm-wide x 4mm-deep groove on the wheel rims. I think what I am seeking is a company that makes custom tires. Suggestions for vendors?
 
I put a set of the Blue Max tires on an old Parks/Craftsman 18" wood band saw. It has had light use for about 5-6 years and no problems.

Bob
 
Who has off-the-shelf tires for you also will depend on the diameter of your wheels.

Carter products has rubber tires from 8" to 42" and urethane tires from 10" to 20" by 2" increments.

Having a metric size that is not close to an imperial size will likely mean that you will have to buy one oversize and trim both sides to fit.

Steve
 
Thanks Dan

Looks like you've come through again!

SG Tool looks like the guys. Bandsaw tires I'm looking for are a "tee" in cross section with crowned top. Probably end up with a crowned filler for the deep groove and a second band over the top.

Cyclotronguy
 








 
Back
Top