DoAll Silencer Bandsaw Blades 1"x.035 13'-3"L 3-4TPI

I have 11 DoAll silencer bandsaw blades. The sizes are all the same 1"-.035" 13'3" Length 3-4TPI. Eight of the blades are brand new, still with the plastic cover for the teeth, three are used but they do not look like they were used much. The teeth are all still sharp, the side rake is strong pronounced, and the printed DoAll logo is visable. Shipping per blade is $20.00, One blade will fit in a USPS flat rate large box. I am asking $25.00 per blade for the new blades, and $10.00 for the used blades, plus shipping. I mistakenly got them at an auction thinking they would fit my machine, but they are too big for my bandsaw. I am just trying to recover a few bucks for what I paid for the two lots. Let me know if you are interested, or have any questions.

Is anyone interested? I had a deal fall though because the buyer was the epitome of the word DIVA, he literally backed out because there were too many messages between us. Interestingly enough I wound up taking a better look at the blades and two of the blades he would have received turned out to be DoAll Carbide tipped blades, wouldn't have been a bad deal since he was going to pay 25.00 a blade. AJCLAY your heart will go on and on. Anyway, shipping for the blades isn't as bad if you buy them all. If you are interested just shoot me a message.

You can cut and weld or braze them to make them smaller and fit your bandsaw. If I didn't already have a blade like that for my saw, that's what I'd be doing with them.

Steve

That's what I did with the Carbide tipped blades yesterday, I swapped them out for the two I originally was planning on keeping. These will fit a DoAll saw it anyone is interested.

i've never really had great success with brazing blades back together or i would be all over these. right thickness and width but about 6" too long for my saw.


Sent from my iPhone using Tapatalk

If you are serious I could cut them down and re-weld them.