I sold my Series I Bridgeport to someone who wanted the R8 spindle, so I am left with the QC spindle. It was purchased new, bare and I installed new bearings. It probably has fewer than 500 hours, as it wasn't long after I bought a Series II and the Series I got pushed into the corner. The spindle nosepiece looks used because I had to buy another R8 spindle to get the extra nosepiece. Unlike an R8, the nosepiece is captive to the QC spindle. I will include 3/16 and 3/8 end mill holders, a TG75 collet chuck, two DA300 collet chucks, all Erickson, and a Lyndex with a 14N drill chuck and key. If you have a need for a different tool holder we may be able to work something out as I have several others that also fit my Tree CNC. It will not include the spanner, as I seem to be only able to find the one for my other machine. I would like $500 plus shipping.