What's new
What's new

FS: 15" Lathe Faceplate, 2" x 8tpi

Arclight

Aluminum
Joined
Feb 6, 2008
Location
Fullerton, CA
I have a 15" manual lathe faceplate in good condition. The spindle attachment is 2x8tpi, outside diameter is 14 3/4" and it as 3/4" dovetails and is 1 1/2" thick.

$100, free local pickup in Southern California or $40 to ship.
PXL_20210111_155725730.jpg
PXL_20210111_155757009.MP.jpg
PXL_20210111_155757009.MP.jpg
PXL_20210111_155820425.jpg
PXL_20210111_155833137.jpg
 
:scratchchin:My wanting eyes are seeing something closer to a 2 1/8x8 thread (2 1/8" being the spindles full OD).

IF that is the case, I can use it, but will need shipping to Conroe TX (77301).
 
:scratchchin:My wanting eyes are seeing something closer to a 2 1/8x8 thread (2 1/8" being the spindles full OD).

IF that is the case, I can use it, but will need shipping to Conroe TX (77301).

Okay, the ID of the threaded part is 1.980" and the thread depth from root to crest is somewhere between .060 and .0755" . Unfortunately, I don't have any sort of thread gauge to really check it better. The bore behind the threaded part measures about 2.155.
 








 
Back
Top