What's new
What's new

FS: Jergens Bock 4" dual station vises

david n

Diamond
Joined
Apr 13, 2007
Location
Pillager, MN
I have 4 Bock vises sold by Jergens. These are an ali body vise with steel rails. The jaw carriers look a little rough, but are actually in good shape. The steel base slides look perfect. All in all they are in good shape. There is only one handle. They weigh about 30 lbs each so shipping won't be too expensive. They are all mounted to a blanchard ground steel sub plate that is 15"x27" I really don't have use for them. If I was to keep them, I was going to make new jaw carriers out of steel. They are fairly simple parts.

$250 each or $900 if you take all 4. $75 for the plate.

http://www.jergensinc.com/Bock-Brand-Interlocking-Vise-4-Inch



IMG_2750.jpg
 
I got these with my latest machine purchase and haven't used them. All 4 are bolted to the steel plate which has a bushing on each side. I'm assuming it was used as a pallet system by the previous owner...............Bushings located it on a receiver plate on the machine with pins.
 








 
Back
Top