FS Monarch 610/612 NOS parts
Close
Login to Your Account
Results 1 to 9 of 9
  1. #1
    Join Date
    Sep 2004
    Location
    Fort Worth, Texas
    Posts
    2,095
    Post Thanks / Like
    Likes (Given)
    239
    Likes (Received)
    175

    Default FS Monarch 610/612 NOS parts

    I have a box of parts for a Monarch lathe, series 60-61 13"-15" approx. Most likely 610 and 612
    These are NEW parts purchased in 1969 and never installed.

    Prices should be about 2/3 of Monarch's price or less, but I'm guessing on most, so you may take advantage.
    Prices include shipping US addresses only at standard flat rate box prices.

    Prices are semi-firm, no loball offers please. If you want the lot I'll discount it. PM me.
    Email works best, PMs 2nd best

    Details and photos below
    img_2541.jpgimg_2342.jpg

  2. #2
    Join Date
    Sep 2004
    Location
    Fort Worth, Texas
    Posts
    2,095
    Post Thanks / Like
    Likes (Given)
    239
    Likes (Received)
    175

    Default

    Set of half-nuts to fit 1.5"-4 tpi Acme leadscrew
    4.375 wide
    5.12" and 2.96" long
    1/2" cam pins
    $325 the pair
    Attached Thumbnails Attached Thumbnails img_2356.jpg   img_2355.jpg   img_2357.jpg   img_2358.jpg   img_2359.jpg  


  3. #3
    Join Date
    Sep 2004
    Location
    Fort Worth, Texas
    Posts
    2,095
    Post Thanks / Like
    Likes (Given)
    239
    Likes (Received)
    175

    Default

    Apron drive Worm
    7-3/16 OAL
    ID 1"
    OD of worm 1.5"
    3 "threads" per inch
    $175
    Attached Thumbnails Attached Thumbnails img_2348.jpg   img_2349.jpg  

  4. #4
    Join Date
    Sep 2004
    Location
    Fort Worth, Texas
    Posts
    2,095
    Post Thanks / Like
    Likes (Given)
    239
    Likes (Received)
    175

    Default

    Apron Driver
    This is the part that slides to engage the worm
    2.829" OAL
    1.492 OD
    1" ID
    2 inside keys approx .200", 180-deg apart
    $75

    img_2350.jpgimg_2351.jpgimg_2352.jpg

  5. Likes TheOldCar liked this post
  6. #5
    Join Date
    Sep 2004
    Location
    Fort Worth, Texas
    Posts
    2,095
    Post Thanks / Like
    Likes (Given)
    239
    Likes (Received)
    175

    Default

    Brass Wormwheel to fit above worm gear
    4.5" OD X 1" wide, 32 teeth
    Width inc. hub 1.676"
    Hub OD 1.738
    bore ID .982"
    Keyway .246
    $325 ($500+ at Monarch)

    (Ignore the tag number - it's labeled wrong per Monarch)
    Attached Thumbnails Attached Thumbnails img_2333.jpg   img_2334.jpg   img_2335.jpg  

  7. #6
    Join Date
    Sep 2004
    Location
    Fort Worth, Texas
    Posts
    2,095
    Post Thanks / Like
    Likes (Given)
    239
    Likes (Received)
    175

    Default

    Tailstock nut
    1" LH Acme thread
    3.30 OAL
    1.5 OD
    Hub/flange is 3"OD x 3/4" thick
    Hub has a recess 1.875" diameter
    takes 4 1/4" SHCS, Countersunk.
    $125

    img_2345.jpgimg_2346.jpgimg_2347.jpg

  8. #7
    Join Date
    Sep 2004
    Location
    Fort Worth, Texas
    Posts
    2,095
    Post Thanks / Like
    Likes (Given)
    239
    Likes (Received)
    175

    Default

    Base for a lantern-style toolpost.

    2.122" Square
    .528 thick
    Your compound tee slot should be 1/2" high and 2-1/8 long

    Internal bores:
    1.496" innner

    1.845 outer.
    Your toolpost should be approx 1.5" body diameter with a 1.845" diameter flange

    $10 each shipped, or 1 free with any of the above items subject to qty available (3)


    Attached Thumbnails Attached Thumbnails img_2353.jpg   img_2354.jpg  

  9. #8
    Join Date
    Jul 2011
    Country
    UNITED STATES
    State/Province
    Utah
    Posts
    842
    Post Thanks / Like
    Likes (Given)
    1689
    Likes (Received)
    310

    Default

    Gotta measure my spare...

  10. #9
    Join Date
    Sep 2004
    Location
    Fort Worth, Texas
    Posts
    2,095
    Post Thanks / Like
    Likes (Given)
    239
    Likes (Received)
    175

    Default

    still available.
    All is listed on ebay at higher prices.
    Open to reasonable offers for direct sale.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •